Bios Setup Settings - Siemens SIMATIC IPC627D Operating Manual

BIOS Setup (SCU)

3.9 BIOS Setup settings

3.9 BIOS Setup settings
If you have changed any default settings in Setup, you can enter them in the following table.
You can then refer to these entries for any future hardware modifications.
Note
Print out the table below and keep the pages in a safe place once you made your entries.
The default setup settings vary depending on the ordered device configuration.
BIOS Setup settings
Main
Setup parameter
System Time
System Date
Advanced > Boot Configuration
Setup parameter "HPET" see submenu "Chipset Configuration", "HPET Support".
Setup parameter
Numlock
POST errors
Advanced > Peripheral Configuration
Setup parameter
Internal COM 1
Base I/O address
2
Interrupt
2
Transceiver mode
2
Internal COM 2
1
Base I/O address
2
Interrupt
2
Transceiver mode
2
Internal LPT
Base I/O address
3
Interrupt
3
40
IPC6x7 IPC4x7
IPC8x7
00:00:00 00:00:00
MM/DD/YYYY MM/DD/YYYY
IPC6x7 IPC4x7
IPC8x7
On On
All without keyboard All without keyboard
IPC6x7 IPC4x7
IPC8x7
Auto Auto
1
3F8 3F8
IRQ4 IRQ4
Auto Auto
1
2F8 2F8
IRQ3 IRQ3
Auto
1
378
IRQ7
IPC2x7 Field programming
device
00:00:00 00:00:00
MM/DD/YYYY MM/DD/YYYY
IPC2x7 Field programming
device
On On
All without keyboard All without keyboard
IPC2x7 Field programming
device
Enabled Enabled
3F8 3F8
IRQ4 IRQ4
RS232
Enabled
2F8 3F8
IRQ3 IRQ4
RS232 RS232
Operating Manual, 05/2016, A5E33664825-AB
BIOS Description