Advertisement
Quick Links
PET730_ifu 58.qxd
2007.11.5
11:14
Page 1
Portable DVD player
PET738
English
on the LCD screen. LCD displays commonly have imperfections,
termed as 'bright dots' by the LCD industry. A limited number of
Register your product and get support at
bright dots were once considered an inevitable side effect of LCD
Congratulations on your purchase and welcone to
www.philips.com/welcome
mass production.With Philips' strict quality control procedures
Philips!
used in our Portable DVD Players, our LCD displays are produced
with zero tolerance for bright dots. Select Portable DVD Players
To fully benifit from the support that Philips offers,
come with Philips Zero Bright Dot
register your product at www.philips.com/welcome.
User manual
screen quality.
Content
Warranty service varies from region to region. Contact your local
Philips representative for more detailed information.
1
Control elements and
5
Start up
functional
3 General information
5.1 Setup
components
5.2 Playback DVD
Power Sources
1.1 Main unit controls
5.3 Playback VCD
This unit operates on a supplied AC/DC adaptor, car adapter, or a
1.2 Front of player
rechargeable battery pack.
5.4 Playback Super (S)-VCD
• Make sure that the input voltage of the AC adaptor is in line
1.3 Right of player
5.5 Playback Music CD
1.4 Left of player
5.6 Playback Music
1.5 Back of the player
MP3/WMA-CD
• Do not touch the AC adaptor with wet hands to prevent
1.6 Remote Control
5.7 Playback Picture-CD
• When connecting with car power (cigarette lighter) adaptor, be
2
Introduction
5.8 Playback from USB
2.1 Your portable DVD
5.9 Analog TV
• Unplug the AC adaptor from the outlet when the unit is not
player
5.9.1 First Time Installation
• Hold the plug to disconnect the AC adaptor. Do not pull the
2.2 Unpacking
5.9.2 Setup TV channels
2.3 Placement
5.9.3 Enjoy TV
2.4 Playable disc formats
6
Addition Functions
2.4.1 DVD-Video
6.1 DISPLAY Menu
2.4.2 Video CD
6.2 Connection
Safety and maintenance
2.4.3 Audio CD / MP3 CD /
6.2.1 Headphone
• Do not disassemble the unit for laser rays are dangerous to
WMA CD
6.2.2 TV
2.4.4 CD with JPEG files
6.2.3 AV input
2.4.5 DivX video discs
• Unplug the AC adaptor to cut the power if liquid or objects get
6.2.4 USB
2.5 Zero Bright DotTM
6.2.5 Coaxial
• Take care not to drop the unit or subject it to strong shocks,
3
General information
7
Troubleshooting
4
Charging the units
8
Technical data
• Do not expose to excessive heat caused by heating equipment
4.1 Charge the DVD player
• This product is not waterproof: do not allow your player to be
4.2 Powering your remote
control
• Do not use any cleaning agents containing alcohol, ammonia,
1 Control elements and functional components
1.1 Main unit controls (see figure 1)
• Apparatus shall not be exposed to dripping or splashing. Do not
1 OPEN
Open disc door to insert or remove disc
2 POWER
Switch the player on / off
• Do not touch the lens!
3 9
Press once to stop playback and store the stop
position. Press twice to stop playback completely.
Hearing Safety
2;
Listen at a moderate volume.
Start / pause / resume playback
• Using headphones at a high volume can impair your
4 J( / )K
Search backward (J() or search forward ()K)
5 - VOL +
Volume control
6 OPTION
Access additional functions
MENU
Display MENU page
7 3, 4, 1, 2
Up / down / left / right cursor
OK
Confirm selection
• Sound can be deceiving. Over time your hearing "comfort level"
1.2 Front of player (see figure 2)
2007 © Koninklijie Philips Electronics
8 POWER/IR/CHR
N.V. All rights reserved.
Power / Remote sensor / charging indicator
http://www.philips.com
1.3 Right of player (see figure 3)
• Excessive sound pressure from earphones and headphones can
9 PHONE 1 & 2 Headphones jack
10 AV OUT
Audio/Video output
To establish a safe volume level:
• Set your volume control at a low setting.
11 AV IN
Audio video input
• Slowly increase the sound until you can hear it comfortably and
12 USB
USB connector
Printed in China
wk0744
13 COAXIAL
Digital audio output
Listen for reasonable periods of time:
14 DC IN 9V
Power supply socket
• Prolonged exposure to sound, even at normally "safe" levels, can
1
1.4 Left of the player (see figure 4)
• Be sure to use your equipment reasonably and take appropriate
15 Antenna terminal
Connect antenna
Be sure to observe the following guidelines when using
1.5 Back of the player (see figure 5)
your headphones.
16 Reset
Reset the player when it is hanged up
• Listen at reasonable volumes for reasonable periods of time.
17 Car mounting screw hole
• Be careful not to adjust the volume as your hearing adapts.
• Do not turn up the volume so high that you can't hear what's
1.6 Remote Control (see figure 6)
1 MENU
Display MENU page
• You should use caution or temporarily discontinue use in
2 3, 4
Up / down / left / right navigation key
J(, )K
Skip to previous/next chapter, track or title
• Do not use headphones while operating a motorized vehicle,
OK
Confirm selection
CH + / -
Change channel
3 DISPLAY
Adjust the display value of the system
• Important (for models with by-packed headphones): Philips
4 OPTION
Access additional functions or title
5 2;
Start / pause / resume playback
6 9
Press twice to stop playback
7 0 - 9
Numeric keypad
2
8 SUBTITLE
Subtitle language selector
9 RETURN
For VCD menu page
• Traffic safety: do not use while driving or cycling as you may
10 A - B
To repeat or loop a sequence in a title
11 SETUP
Enter SETUP menu
12 VOL+/–
Access additional functions
3
13 s
Mute player volume
14 AUDIO
Audio language selector
15 ZOOM
Enlarge video image
Handling discs
• Do not attach paper or tape to the disc.
4
CAUTION Use of controls or adjustments or performance
• Keep the disc away from direct sunlight or
of procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
• Store the disc in a disc case after playback.
• To clean, wipe the disc outwards from the
5
2 Introduction
On handling the LCD screen
The LCD is manufactured using high precision technology.You may,
2.1 Your portable DVD player
however, see tiny black points that continuously appear on the LCD.
Your portable DVD player plays digital video discs conforming to
This is a normal result of the manufacturing process and does not
the universal DVD Video standard.With it, you will be able to enjoy
indicate a malfunction.
full-length movies with true cinema picture quality, and stereo or
Environmental information
multichannel sound (depending on the disc and on your playback
We have reduced the packaging to its minimum and made it easy to
set-up).
separate into mono materials: cardboard, PS, PE and PET.
The unique features of DVD-Video, such as selection of soundtrack
Your set consists of material which can be recycled if disassembled
and subtitle languages, and of different camera angles (again
by a specialized company. Please observe the local regulations to
depending on the disc), are all included.
dispose of packaging, exhausted batteries and old equipment.
What's more, parental lock lets you decide which discs your
children will be able to see.You will find your player remarkably
Copyright information
easy to use with the On-Screen Display and player display in
"DivX, DivX" Certified, and associated logos are trademarks of
combination with the remote control.
DivX, Inc. and are used under license."
All other brand and product names are trademarks of their
6
2.2 Unpacking
respective companies or organizations.
First check and identify the contents of your package, as listed
Unauthorized duplication of any recordings downloaded from the
below:
internet or made from CDs / VCDs / DVDs is a violation of
• Portable DVD player
• Remote Control
copyright laws and international treaties.
• Car adaptor (12V)
• AC power adaptor
The Windows Media and the Windows logo are registered trademarks
• User manual
• AV cable
• Car headrest mounting kit
of Microsoft Corporation in the United States and/or other countries.
2.3 Placement
4 Charging the units
• Place the player on a firm, flat surface.
• Keep away from domestic heating equipment and direct sunlight.
4.1 Charge the DVD player
• If the player cannot read CDs/DVDs correctly, try using a
Plug in the AC/DC adaptor
commonly available cleaning CD/DVD to clean the lens before
• The RED LED indicates
taking the player to be repaired. Other cleaning methods may
that charging is in progress.
destroy the lens.
When the set is not in use, it
• Always keep the disc door closed to avoid dust on the lens.
will take about 4 hours to fully charge it. However, when in use, it
• The lens may cloud over when the player is suddenly moved
will take more than 8 hours to fully charge it.*
from cold to warm surroundings. It is then not possible to play a
• The RED LED will turn off when the set is fully charged.When
CD/DVD. Leave the player in a warm environment until the
the low battery icon appears on the screen, please charge the
moisture evaporates.
player.
2.4 Playable disc formats
* Rechargeable batteries have a limited number of charge cycles
In addition to DVD-Video disc, you will also be able to play all
and may eventually need to be replaced. Battery life and number of
Video CDs, CDs, CDR, CDRW,DVD±R and DVR±RW.
charge cycles vary by use and settings.
2.4.1 DVD-Video
4.2 Powering your remote control
Depending on the material on the disc (a movie, video
1 Open the battery compartment. Remove the
clips, a drama series, etc.) these discs may have one or more Titles,
and each Title may have one or more Chapters.To make access
2 Insert 1 x lithium 3V battery, type CR2025, then
easy and convenient, your player lets you move between Titles, and
also between Chapters.
2.4.2 Video CD
Depending on the material on the disc (a movie, video
clips, a drama series, etc.) these discs may have one or
more Tracks, and tracks may have one or more indexes, as indicated
on the disc case.To make access easy and convenient, your player
lets you move between tracks and between indexes.
2.4.3 Audio CD / MP3 CD / WMA CD
Audio CDs / MP3 CD / WMA CD contain music
tracks only.You can play them in the conventional
way through a stereo system using the keys on
the remote control and/or main unit, or via the
TV using the On Screen Display (OSD).
2.4.4 CD with JPEG files
You can also view JPEG still photos on this player.
2.4.5 DivX video discs
DivX is a popular media technology created by DivX, Inc. DivX
5 Start up
media files contain highly compressed video with high visual quality
that maintains a relatively samll file size. DivX files can also include
5.1 Setup
advanced media features like menus, subtitles, and alternate audio
1 Press SETUP. A list of features is shown.
tracks. Many DivX media files are available for download online, and
you can create your own using your personal content and easy-to-
use tools from DivX.com.
2.5 Zero Bright Dot
TM
Enjoy highest-quality images that are free from annoying blank spots
Fast backward / Fast forward
TM
Policy to guarantee optimal
Volume Control
2 Use 3 / 4 to highlight your selection.
Repeat
3 Use 2 to enter a sub-menu
4 Use the navigation keys to highlight your desired setting and
Shuffle
press OK to confirm.
5 The SETUP menu includes:
General
Stop
Language
Set On Screen Display (OSD) languages
5.7 Playback Picture-CD
PBC settings
Set Playback Control function ON/OFF.This
with the local voltage. Otherwise, the AC adaptor and unit may
feature is available for Super VCD.
The player can only read pictures in JPEG format.
be damaged.
1 Briefly press POWER on the main control of the player to
DivX (VOD)
Get the DivX (Video-On-Demand) code
switch on the set.
Parental
Set parental options
electric shock.
2 Open the disc door and insert the disc.
Set password
Change password (default: 9999)
• The set will start to play the disc automatically.
Factory settings Restore factory settings
sure the input voltage of the adaptor is identical with car voltage.
3 Use navigation keys to select the folder and JPEG file to be played.
Video
used for long periods of time.
TV Display
Set screen display aspect ratio
TV standard
Set video output format to TV system
power cord.
Mpeg 4 subtitle Select subtitle language for Mpeg 4 video, e.g.
DivX video
Audio
Please always use supplied AC/DC adaptor (AY4117).
Dolby
Set Dolby output
Digital (SPDIF) Set digital output format
The following functions are available during playback:
5.2 Playback DVD
Pause
eyes.
1 Briefly press POWER on the main control of the player to
Any service should be done by qualified service personnel.
switch on the set.
Previous/Next Briefly press J( or )K once or several times to
2 Open the disc door and insert the disc.
inside the unit.
• The player will start to play the disc automatically.
Rotate
3 Use navigation keys 1, 2, 3, 4 to select an item from the DVD
which may cause malfunction.
disc menu, such as play now, select languages and subtitle.
or direct sunlight.
The following functions are available during playback:
Press 2; to pause playback.You can resume
Zoom
Pause
submersed in water.Water entering the player may cause major
playback by pressing 2; again
damage.
Previous/Next Briefly press J( or )K once or several times to
select your desired chapters
benzene, or abrasives as these may harm the player.
Fast backward / Fast forward
Stop
Keep pressing J( or )K to initiate fast
place any sources of danger on the appartus (e.g. liquid filled
4 At the end of the playback, press 9 / to eject the disc from the
backward/forward.When '2x' is shown on the
objects,lighted candles)
player.
screen, press J( or )K briefly to change speed
5.8 Playback from USB
to 4x, 8x, 16x, 32x or resume normal speed.You
may also press 2; to resume normal playback.
This USB port supports the playback of JPEG / MP3 / WMA /
Volume Control
DivX / MPG-4 files.
Press +/- briefly or repeatedly to increase or
hearing.This product can produce sounds in decibel
decrease the sound volume
ranges that may cause hearing loss for a normal person, even for
Briefly press 9 to stop playback
•
Stop
exposure less than a minute.The higher decibel ranges are
Subtitle
Change subtitle display.The function is available
offered for those that may have already experienced some
by pressing either the SUBTITLE or
•
hearing loss.
OPTIONS key
Language
Change language.The function is available by
adapts to higher volumes of sound. So after prolonged listening,
pressing either the AUDIO or OPTIONS key
what sounds "normal" can actually be loud and harmful to your
Angle
Change the viewing angle provided in the DVD
hearing.To guard against this, set your volume to a safe level
•
disc.The function is available by pressing the
before your hearing adapts and leave it there.
OPTIONS key.
Zoom
Zoom in the screen, and then use the navigation
cause hearing loss.
keys to pan the screen.The function is available
by pressing either the ZOOM or OPTIONS
key
A-B Repeat
Set repeat loop playback. Press A-B to set the
1 Briefly press POWER on the main control of the player to
clearly, without distortion.
switch on the set.
starting point and press A-B again to set the
2 Insert a USB flash drive or USB memory card reader into the
ending point.Then, the player will repeat the loop
playback. Press A-B to cancel the loop playback
USB port.
also cause hearing loss.
• The player will browse and show the contents in the USB flash
device automatically.
5.3 Playback VCD
breaks.
3 Use navigation keys to select the file you want to access, then
1 Briefly press POWER on the main control of the player to
press OK to play it.
switch on the set.
2 Open the disc door and insert the disc.
• The set will start to play the disc automatically.
The following functions are available during playback:
around you.
Pause
Press 2; to pause playback.You can resume
playback by pressing 2; again
potentially hazardous situations.
Previous/Next Briefly press J( or )K once or several times to
cycling, skateboarding, etc.; it may create a traffic hazard and is
select your desired track
4 At the end of the playback, unplug the USB flash drive or USB
illegal in many areas.
Fast backward / Fast forward
Keep pressing J( or )K to initiate fast
memory card from the player
guarantees compliance with the maximum sound power of its
backward/forward.When '2x' is shown on the
screen, press J( or )K briefly to change speed
audio players as determined by relevant regulatory bodies only
To deactivate the USB browser or want to switch to DVD
to 4x, 8x, 16x, 32x or resume normal speed.You
with the original model of provided headphones. In case this one
playback, simply unplug the USB connection.
may also press 2; to resume normal playback.
needs replacement, we recommend that you contact your
retailer to order a model identical to that of the original
Volume Control
provided by Philips.
Press +/- briefly or repeatedly to increase or
5.9 Analog TV
decrease the sound volume
Before installation, please make sure that you are in an area with
cause an accident.
Briefly press 9 to stop playback
Stop
sufficient TV signal coverage.As the TV signal is weaker in an indoor
Audio
Some VCDs only contain 2 languages for
environment, please always connect to a TV wall socket for the
selection.You can change the language using this
When the player is in use for a long period of time, the
best reception quality when using it at home or indoor.
surface will be heated.This is normal.
function.The function is available by pressing
5.9.1 First Time Installation
either the AUDIO or OPTIONS key
Antenna connection
Zoom
Zoom in the screen, and then use the navigation
Before you start to search for TV channels, connect the DVD
keys to pan the screen.The function is available
by pressing either the ZOOM or OPTIONS
player to the antenna as shown.
key
heat sources.
A-B Repeat
Set repeat loop playback. Press A-B to set the
starting point and press A-B again to set the
ending point.Then, the player will repeat the
center with a soft, lint-free clean cloth.
loop playback. Press A-B to cancel the loop
playback
5.4 Playback Super (S)-VCD
(Super) Video CDs may feature PBC (Play Back Control).This
5.9.2 Setup TV channels
allows you to play the video CDs interactively, following the menu
Setup you TV
on the display.
1 Press OPTIONS and select SOURCES > TV.
1 Briefly press POWER on the main control of the player to
switch on the set.
2 Insert the (S)VCD into the disc slot on the right side of the player.
If PBC is on, the disc index menu will appear on the screen.
3 Use numeric keypad 0-9 to input your selection or select a play
option.
4 Press RETURN on the remote control to return to the
previous menu.
5 To turn Playback Control mode on/off, please go to SETUP and
select PBC settings.
5.5 Playback Music CD
2 In TV mode, press SETUP, the TV Setup menu will be displayed
to show the following available functions.
1 Briefly press POWER on the main control of the player to
switch on the set.
2 Open the disc door and insert the disc.
• The set will start to play the disc automatically.
The following functions are available during playback:
Press 2; to pause playback.You can resume
Pause
playback by pressing 2; again
Previous/Next Briefly press J( or )K once or several times to
select your desired track
Fast backward / Fast forward
Keep pressing J( or )K to initiate fast
–
tv mode: Select a TV mode
backward/forward.When '2x' is shown on the
–
auto search: Run auto search for all available TV channels
screen, press J( or )K briefly to change speed
–
ch. manage: Manage channels by deleting or renaming them
to 4x, 8x, 16x, 32x or resume normal speed.You
–
fine tuning: Fine tune each TV channel
may also press 2; to resume normal playback.
Volume Control
TV mode
Press +/- briefly or repeatedly to increase or
decrease the sound volume
Repeat
Press OPTIONS key to select Repeat 1 track
or Repeat all tracks
protective plastic tab (first time users only).
Shuffle
Press OPTIONS key to turn shuffle playback
on or off
close the compartment.
Stop
Briefly press 9 to stop playback
CAUTION
5.6 Playback Music MP3/WMA-CD
• Batteries contain chemical substances, so they should be
1 Briefly press POWER on the main control of the player to
disposed of properly.
switch on the set.
• Danger of explosion if battery is incorrectly replaced.
2 Open the disc door and insert the disc.
Replace only with the same or equivalent type.
tv
• The set will start to play the disc automatically.
• Incorrect use of batteries can cause electrolyte leakage and
3 Use navigation keys to select the folder and MP3/WMA file to
cable tv For cable TV reception
will corrode the compartment or cause the batteries to
be played.
burst.
Auto search
• Remove the batteries if the set is not to be used for a long
Auto search provides an overall search for all available channels in
time.
your country.
• Perchlorate Material – special handling may apply. See
Press OK.The system will remind you to select area first.
www.dtsc.ca.gov/hazardouswaste/perchlorate.
• Battery shall not be exposed to excessive heat such as
sunshine, fire or the like.
4 The following functions are available during playback:
Press 2; to pause playback.You can resume
Pause
playback by pressing 2; again
Previous/Next Briefly press J( or )K once or several times to
select your desired track
–
Please make sure that you select the correct country that
6.2.4 USB
Keep pressing J( or )K to initiate fast
matches your local TV system.
You can plug in the USB flash drive to view the stored pictures and
backward/forward.When '2x' is shown on the
Use 3 / 4 key to select your country.
video.
–
screen, press J( or )K briefly to change speed
1 After plug in the USB flash drive, the DVD player will browse
When area is set, the system will start auto search.The screen will
to 4x, 8x, 16x, 32x or resume normal speed.You
the content of your USB drive automatically.
display "running xx%".
may also press 2; to resume normal playback.
2 See section 5.8 Playback from USB for playback details.
auto search
3 Unplug the USB drive after enjoyment.This will also deactivate
the USB browser function.
Press +/- briefly or repeatedly to increase or
auto search
auto search
decrease the sound volume
Press OPTIONS key to select Repeat 1 track
or Repeat all tracks
ch. found: 03
Press OPTIONS key to turn shuffle playback
on or off
Briefly press 9 to stop playback
searching 03%
6.2.5Coaxial
setup exit
It provides digital audio output signal that you can connect to your
home theater equipment to decode the digital audio signal.
–
Upon completion, the screen will display "finished".
When search is completed, the first channel found will be displayed.
A channel counter will indicate the number of channels that can be
found.
Note Sometimes, there may be duplicated or empty channels
found after Auto Search.This is due to TV signal interference in
Yellow
some areas, not a malfunction of your product.
7 Troubleshooting
Channel manage
If it appears that the DVD-Video player is faulty, first consult this
You can perform channel management
checklist. It may be that something has been overlooked.
ch. manage
auto search
WARNING Under no circumstances should you try to
current ch: 26
repair the set yourself as this will invalidate the guarantee.
del. current: 26
If a fault occurs, first check the points listed, before taking the
set for repair. If you are unable to solve a problem by following
Press 2; to pause playback.You can resume
copy to:
26
these hints, consult your dealer or service centre.
playback by pressing 2; again
save
select your desired track
Symptom
setup exit
Press OPTIONS key to select rotate mode.
No power
Then, use 1 to rotate the picture clockwise.
–
current ch: It displays the channel number of the TV channel
Use 2 to rotate the picture anti-clockwise.
you are currently watching.
Press OPTIONS key to exit rotate mode.
–
del. current: You can delete the current channel. E.g. If a
Zoom in the screen, and then use the navigation
duplicate channel was found due to interference, you can
keys to pan the screen.The function is available
delete the duplicate channel.
by pressing either the ZOOM or OPTIONS
–
copy to: You can copy the current channel to an existing one,
key
e.g. to copy channel 26 to channel 12. The former channel will be
Distorted picture
Briefly press 9 to stop playback
overwritten. Please confirm when you rename the channel.
Please remember to save before you exit Ch. manage menu.
Otherwise, your changes will not be captured.
Fine tuning
Completely distorted
When there is interference when watching the TV, you can fine
tune the frequency of the reception.
picture / no colour in
the TV screen
fine tuning
No sound
Transfering and recording of data from the DVD to the
auto search
USB port is not possible.
tuning
Disc can't be played
The USB plug-in storage only support Mass Storage
system:
(MSC) device. It does not support Hard Disk USB storage
pal
device and storage in MTP (Music Transfer Protocol)
audio:
format.
pal dk
The player does not
respond to the remote
The DVD player will take some time to browse the
control
content of your USB flash drive.The browsing time will
setup exit
vary for memory capacity and the number of content in
In the fine tuning menu, press 1 / 2 key to decrease / increase
–
Distorted or B/W
your USB drive.
the frequency of the reception.
picture with DVD
-
You can press 1 / 2 keys until a better picture quality with less
No audio at digital
output
interference is found.
The Fine Tuning screen will also shown below information:
Player does not
respond to all
system: The standard TV system used in various countries. E.g.
China use PAL TV system, Russian use SECAM TV
operating commands
during playback
system
Cannot detect USB
audio:
E.g. China is PAL DK, Russian is SECAM D.
plug-in
5.9.3 Enjoy TV
To change channels
–
Press OPTIONS and select SOURCES > TV
–
In TV mode, you can either press CH-/CH+ to change
channels.
–
Or, you can enter the channel number with the numeric keys
and press OK.
Cannot switch to AV-in
or no signal
To change volume
–
Press vol+ / vol – to adjust the volume level.
–
Press s to mute the volume. Press s again to restore sound.
6 Addition Functions
Switch between
DVD/USB/AV-in
6.1 DISPLAY Menu
When you press DISPLAY during playback, the following menu
will appear and you can access the corresponding function and
information:
display menu
auto search
brightness
contrast
color
disp mode
lcd off
Player feels warm
battery
Display goes dimmer
DISPLAY exit
when AC is unplugged
Brightness
It allows you to adjust the brightness of the
screen
This set complies with the radio interference requirements of the
Contrast
It allows you to adjust the contrast of the
European Union.
screen
Color
It allows you to adjust the color of the screen
8 Technical data
from cool, warm and normal.
Dimensions
Disp mode
It allows you to select full screen view or
Option menu
normal view mode.
Weight
LCD off
You can turn off the screen in some situations,
Power supply
Sources
such as when connected to TV or playing music
Power Consumption
Setup
discs.This can save the battery power
Operating temperature range
Battery
It allows you to view which kind of power
supply used (internal = battery; external = AC
Laser wavelength
Video system
power), and to set power saving function on or
off if battery power is used.
PHILIPS reserves the right to make design and specification
[Option] EXIT
To change power saving mode:
changes for product improvement without prior notice.
1. Ensure battery is used as power supply
Modifications not authorized by the manufacturer may
2. Press DISPLAY button, then press 3/4 to
void users authority to operate this device.
tv setup menu
select "battery".
All rights reserved.
3. Press 3/4 to select "pwr saving: On", then
press OK to change "On" to "Off" or vise
Copyright information
tv mode
auto search
versa.
The making of unauthorized copies of copy-protected material,
including computer programmes, files, broadcasts and sound
ch. manage
6.2 Connection
recordings, may be an infringement of copyrights and constitute a
fine tuning
criminal offence.This equipment should not be used for such
6.2.1 Headphone
purposes.
Connect the headphone to either one of the headphone jacks on
the side of the player.
Disposal of your old product
setup exit
6.2.2 TV
You can connect the player to a TV and enjoy your DVD.
Please be informed about the local separate collection system for
electrical and electronic products.
Please act according to your local rules and do not dispose of your
White
old product with your normal household waste.The correct
tv mode
Red
disposal of your old product will help prevent potential negative
consequences to the environment and human health.
Yellow
tv mode
cable tv
6.2.3 AV input
You can connect to other devices such as Digital Video Recorder,
Digital Camera, etc.
setup exit
For normal on-the-air TV reception
White
Red
Yellow
The video input devices, such as video amplifier, digital video
recorder, digital camera should have the RCA output
setup exit
connection on the device. If you device does not have the
RCA output, please consult your dealer.
china
russia
usa
hongkong
india
setup exit
Remedy
• Check if both plugs of the mains cord
are properly connected.
• Check if there is power at the AC outlet
by plugging in another appliance.
• Check if battery pack is inserted
appropriately.
• Check if car adaptor is connected
appropriately.
• Check the disc for fingerprints and clean
with a soft cloth, wiping from centre to
edge.
• Sometimes a small amount of picture
distortion may appear.This is not a
malfunction.
The NTSC/PAL setting may be in the
wrong status. Match your TV's setting with
the player's setting.
Check audio connections. If using a HiFi
amplifier, try another sound source.
• Ensure the disc label is upwards.
• Clean the disc.
• Check if the disc is defective by trying
another disc.
Aim the remote control directly at the
sensor on the front of the player. Avoid all
obstacles that may interfere with the signal
path. Inspect or replace the batteries.
Use only discs formatted according to the
TV-set used (PAL/NTSC).
• Check the digital connections.
• Operations are not permitted by the
disc.
• Refer to the instructions in the disc
inlay.
• Unplug the USB connection and plug-in
again. Detection may take some time
that vary with the capacity of your USB
device.
• The DVD player only support Mass
Storage (MSC) format from USB flash
drive.
• The DVD player does not support Hard
Disk storage or Media Transfer Protocol
(MTP) format.
• Unplug the AV-in connection and plug-in
again.
• Check the connection from the AV
output device, such as digital camera,
video recorder, etc.
• Use the provided AV cable for
connection.
• DVD mode is default source during the
DVD player power on.
• Plug in USB will activate USB mode.
Deactivate it by unplug the connection.
• Plug in AV-in will activate AV-in mode.
And deactivate it by unplugging the
connection.
• Do not plug-in USB & AV-in at the same
time. Plug-in one type connection at a
time only.
• Unplug the connection before you plug-
in another connection.
When the player is in use for a long period
of time, the surface will be heated.
This is normal.
The unit is saving power to ensure longer
playtime with battery. It is normal.
Adjust the brightness in the SETUP menu.
20.4 x 16.8 x 3.3 cm
8.0 x 6.6 x 1.3 inches
1.0 kg / 2.19 lb
DC 9-12V 1.8-2.2A
≤ 20W
0 - 50°C (32 - 122°F)
650nm
NTSC / PAL / AUTO
Your product is designed and manufactured with high
quality materials and components, which can be recycled
and reused.
When this crossed-out wheeled bin symbol is attached
to a product, it means the product is covered by the
European Directive 2002/96/EC.
Advertisement
