All rights reserved. No part of this publication may by reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronics, mechanical, photocopying, or otherwise without the prior permission of Philips 3141 785 30840 Version 1.0...
Separation : DVD Portable Left-Right Channel 2 dB 1. Download the latest software from the Philips Balance : support site 2. Unzipped the files and then burn it onto a CD ROM then playback the CD ROM on the DVD...
Page 3
2. SAFTETY INSTRUCTIONS WAARSCHUWING WARNING Alle IC’s en vele andere halfgeleiders zijn All ICs and many other semi-conductors are gevoelig voor electrostatische ontladingen susceptible to electrostatic discharges (ESD). (ESD). Careless handling during repair can reduce life Onzorgvuldig behandelen tijdens reparatie kan drastically.
Page 4
2.1 ESD PROTECTION When the power supply is being turned on, you may not remove this laser cautions label. If it removes, radiation of laser may be received. PREPARATION OF SERVICING Pickup Head consists of a laser diode that is very susceptible to external static electrocity. Although it operates properly after replacement, if it was subject to electrostatic discharge during replacement, its life might be shortened.
Page 5
SAFTY NOTICE SAFTY PRECAUTIONS LEAKAGE CURRENT CHECK Plug the AC line cord directly into a 120V AC outlet (do Measure the AC voltage across the 1500 resistor. not use an isolation transformer for this check). Use an The test must be conducted with the AC switch on and AC voltmeter, having 5000 per volt or more sensitivity.
4. MECHANICAL INSTRUCTIONS Disassembly Procedure on PET320 Screw Philips 12NC 1 Remove the screws on 994000003857 (7pcs) bottom housing cabinet 2 Use finger or treezer to separate middle cabinet from the bottom cabinet assy 3 Generally open up the bottom cabinet...
Page 8
4. MECHANICAL INSTRUCTIONS Disassembly Procedure on PET320 Screw Philips 12NC 5 Remove the screws on 994000003858 (5pcs) bottom PCBA to separate it from the bottom cabinet 6 Lift up the driver generally from the pin area on the middle cabinet...
Page 9
4. MECHANICAL INSTRUCTIONS Disassembly Procedure on PET320 Screw Philips 12NC 9 Remove the screws on 994000003862 (4pcs - LCD edge to separate it included in LCD from the top cabinet module) 10 The button key could be picked up easily...
5. TROUBLESHOOTING & SERVICE TIPS 5.1 Procedure to change region code 1. Open DVD Door 2. Press and hold the OSD key together with the POWER ON ( II) key for about 4sec to enter CONFINGURATION SETUP menu 3. Press the UP and DOWN ( ▼) key to enter REGION on menu Version : 1.00 REGION AGING SETTING...
Page 11
5. TROUBLESHOOTING & SERVICE TIPS SYMPTOM: NO POWER...
Page 12
5. TROUBLESHOOTING & SERVICE TIPS SYMPTOM: NO IMAGE / NO SOUND...
Page 13
5. TROUBLESHOOTING & SERVICE TIPS SYMPTOM: THE DVD DRIVE DOES NOT WORK...
Page 14
5. TROUBLESHOOTING & SERVICE TIPS SYMPTOM: THE DVD DRIVE DOES NOT OPERATE WITH BATTERY SYMPTOM: NO SOUND FROM HEADPHONE...