Related Manuals for Philips 55PP925
Summary of Contents for Philips 55PP925
- Page 1 Projection Television 43”/50”/ 55’’ Instructions for Use 43PP925 50PP925 55PP925 3135 015 22191...
-
Page 2: Table Of Contents
Thank you for purchasing this television set. You are now the proud owner of a PHILIPS TV set, which promises full value to you as a customer. Please read the instruction manual carefully and thoroughly to help you install and operate your TV set. -
Page 3: Safety Information /Useful Tips
AFETY Safety Disconnect mains plug when : – the red light below the TV screen is flashing continuously. – a bright white line is displayed across the screen. – cleaning the TV screen. Never use abrasive cleaning agents. Use a slightly damp chamois leather or soft cloth. -
Page 4: Installation
5 cm 5 cm 5 cm NSTALLATION Positioning of the TV set • Place your TV set on a solid base, strong enough to withstand the weight of the set. • Leave a space of at least 5 cm around each side of the TV set to allow for proper ventilation. -
Page 5: Playback
ONNECTING THE You can view the playback of VCR tapes (Video Disc players, camcorders, etc.) by using the AUDIO and VIDEO INPUT sockets on the rear of the TV. – Connect the VIDEO and AUDIO IN sockets on the rear of the TV to the AUDIO and VIDEO OUT sockets on the VCR. -
Page 6: Connecting The Audio /V
ONNECTING THE Camcorder Connect the headphone cable to the headphone socket for personal listening For more convenient direct playback connections, the Side Audio/Video Input sockets allow for quick and easy connections, particularly Camcorder tape recordings. – Connect the S-VIDEO socket (if available) from the Camcorder to the Side S-VIDEO socket of the TV. -
Page 7: Sockets
ONNECTING THE Connection for recording from the TV channel – Connect the corresponding INPUT sockets of the VCR to the MONITOR OUTPUT sockets on the rear of the TV. – To enhance the sound of your TV, connect the AUDIO L and R sockets to an external audio system instead of the VCR. - Page 8 XTERNAL Center Channel Amp Input Front Speakers By adding an external audio system, you can create the feeling of reflected sound that surrounds you at a movie theater or concert hall. – Connect the corresponding OUTPUT sockets of a receiver with Dolby Pro Logic* or Dolby Digital to the CENTER CHANNEL AMP INPUT sockets on the rear of the TV.
-
Page 9: External Speaker Connections
XTERNAL External Powered Subwoofer Connection Back of Powered Subwoofer – Connect the INPUT sockets of a powered subwoofer to the SUBWOOFER socket on the rear of the TV. You can use a y-shaped cable to make the connection. You can also use a single cable and connect to either the R or L Low Level Input sockets. -
Page 10: Functions Of Remote Control
UNCTIONS OF SLEEP Allows you to select a time period after which the set will switch to standby mode automatically. – Displays the channel number, sound and colour transmission mode, status of the sleeptimer, channel name (if channel is named) and the current time (if current time is being entered in the Timer menu). - Page 11 UNCTIONS OF EMOTE STANDBY – Switch set off temporarily to standby mode. (The red light indicator lights up when set is in standby mode.) – To switch on set from standby mode, press Channel Up/Down, Digit (0-9) or Standby button. CC (Closed Captioning) Button Allows the hearing impaired to read the voice content of television programs when “ON”...
- Page 12 UNCTIONS OF Mains Power button Power/Standby button Standby Light Indicator Source Select button Channel button Channel button Volume button Volume button Remote Sensor Note: When the Mains Power button has been pressed so that the TV is in Power/Standby mode, you can press any of the TV’s other controls to turn the set on. TV C (43PP925) ONTROLS...
-
Page 13: Functions Of Tv Controls
Display the main menu. Note • Press the Channel next item on the menu. • Press the Volume sub-menus and adjust the settings. Cycle through the signal sources. 55PP925) MENU SOURCE SELECT button to select the button to access the... -
Page 14: Selecting The Menu Language, Tuner Mode
ELECTING THE UTOMATIC Before you tune in the channels by the Auto Store method, select the desired menu language and tuner mode. Note: The available menu languages will vary based on region. MENU ANGUAGE, UNING OF 1. Enter main menu. 2. -
Page 15: Fine Tuning Of Channels
This feature allows you to adjust picture reception in areas of weak reception. MENU SURF MENU 1. Enter main menu. 2. Select INSTALL. 3. Enter install menu. UNING OF SURF MENU SURF 4. Press button repeatedly until MANUAL is selected. 5. -
Page 16: Editing Of Channels
This feature allows you to edit or skip channels which have bad or weak TV signal or channels that you do not watch often. Note : Once a channel is skipped, you cannot have access to it by the CHANNEL + or – button. -
Page 17: Naming Of Channels
This feature allows a selection of 50 pre-defined names. It also allows you to enter a new name or modify an existing name according to your personal preference. MENU SURF MENU 1. Enter main menu. 2. Select INSTALL. MENU AMING OF HANNELS SURF MENU... -
Page 18: Using The Picture Menu
The picture menu allows you to make adjustments to the picture. It also allows you to select and activate other features in the menu. 1. Press the (MENU) button to enter main menu. MENU 2. Press the (CURSOR RIGHT) button to enter the PICTURE menu. 3. -
Page 19: Using The Sound Menu
The sound menu allows you to make adjustments to the sound. It also allows you to select and activate other features in the menu. 1. Press the (MENU) button to enter main menu. MENU 2. Press the (CURSOR DOWN) button to select the SOUND menu. 3. -
Page 20: Convergence
ONVERGENCE Due to the influence of magnetic fields and changes in the position of the TV, the red, blue, and green screen colours may not align properly. The result is that red or blue colours may appear around the edges of images. If various images on the entire picture have red outlines, adjust CONVERGE RED. - Page 21 ONVERGENCE If various images on the entire picture have red outlines, adjust CONVERGE RED. Then if any red outlines remain, adjust MULTIPOINT RED. If various images on the entire picture have blue outlines, adjust CONVERGE BLUE. Then if any blue outlines remain, adjust MULTIPOINT BLUE.
-
Page 22: Multipoint Red/Blue
ONVERGENCE MENU Note: You can adjust MULTIPOINT BLUE similarly to the way you would adjust MULTIPOINT RED. ULTIPOINT Navigate to a cross image that has a colour outline. Note: To display three hidden cross images, navigate to bottom row. Enter ADJUST mode. Adjust cross image until colour outline is gone. -
Page 23: Undo Multipoint
ONVERGENCE UNDO MULTIPOINT allows you to restore the TV’s picture screen to the way it was before you made Multipoint adjustments. MENU ULTIPOINT 1. Enter main menu. 2. Enter PICTURE menu. 3. Press button repeatedly until CONVERGENCE is selected. 4. Enter CONVERGENCE menu. -
Page 24: Activating The Timer
The Timer feature allows you to set the timer to switch to another channel at a specified time while you are watching another channel or when the TV is on standby mode. TIMER MENU MENU CTIVATING THE 1. Enter TIMER menu. 2. - Page 25 CTIVATING THE MENU Note 30 seconds before the timer is activated, a message indicating the time left for the channel switch will appear on the screen. To disable the channel switch, press any button on the remote control. IMER 12. Exit from STOP TIME mode.
-
Page 26: Activating The Child Lock Access Code
CTIVATING THE The Child Lock feature allows you to lock channels to prevent your children from watching programmes you deem undesirable. Note : You cannot have access to the locked channels via the TV set’s controls. You can only have access to the locked channels via the remote control. Keep the remote control out of reach so as to prevent your children from having access to it. -
Page 27: Change Code
CTIVATING THE Note : After you have exited menu from screen and you want to enter child lock menu again, you need to key the new access code only once. If you have forgotten the new access code, key in 0711 twice to enter the child lock menu. Upon entering the child lock menu, you can proceed to change code again. -
Page 28: Lock Channel
CTIVATING THE MENU SURF MENU 1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu. Note : You cannot have access to the locked channels via the TV set’s controls. You can only have access to the locked channels via the remote control. When AV1 source is locked, CV1 source is automatically locked. -
Page 29: Clear All
CTIVATING THE To unlock all channels that you have locked, enter the Child Lock menu and activate the CLEAR ALL mode. MENU SURF MENU 1. Enter main menu. 2. Select FEATURES 3. Enter FEATURES menu. Note You can also unlock individual channels by the LOCK CHANNEL menu. •... -
Page 30: Using The Closed Captioning Control
SING THE Closed Captioning (CC) allows you to read the voice content of television programmes on the TV. Designed to help the hearing impaired, this feature uses on-screen “text boxes” to show dialogue and conversations while the TV programme is in progress. MENU SURF MENU... - Page 31 SING THE Example of a CAPTION mode D a r l i n g , a r e s u r e y o u d o n o t w a n t a n y t h i n g t o e a t ? Example of a TEXT mode Closed Caption Programme on TCS All items are based on standard time...
-
Page 32: Sing The Urf Ontrol
A list or series of previously viewed channels can be selected with the SURF button. This feature allows you to switch between different TV programmes that currently interest you. You can set up to a maximum of ten channels in the SURF list. SURF Note : To view the the selected channels in the surf list, press the SURF button repeatedly to cycle through the channels. -
Page 33: Ontrol
CTIVATING THE The Blue Mute feature indicates to you the absence of signal in the transmission when the “ON” option is activated. Upon the detection of absence of signal, the TV screen will turn blue in colour. MENU SURF MENU 1. -
Page 34: Smart Picture And Smart Sound
MART ICTURE AND SMART PICTURE feature offers you a choice of 5 picture settings, namely, PERSONAL, RICH, NATURAL, SOFT and MULTIMEDIA. SMART SOUND feature offers you a choice of 4 sound settings, namely, PERSONAL, VOICE, MUSIC and THEATRE. SMART Press (SMART PICTURE) or PICTURE through the settings to select your desired mode. -
Page 35: Activating The Pip
CTIVATING THE OUBLE Picture-in-Picture feature allows you to call up a sub-screen within your main screen, enabling you to watch two channels at the same time. Double Window feature allows you to divide the main screen into two sub-screens, enabling two channels to be watched simultaneously. How to switch on the PIP/Double Window screen •... - Page 36 CTIVATING THE ONTROL How to select a PIP channel PROG. LIST INCR. PICT. V. DOLBY A/CH • Press the STEREO/SAP switch on PIP screen. FREEZE ON/OFF POSITION – SWAP PIP CH • Press the V. DOLBY A/CH PROG. LIST INCR. PICT. (PIP CH –) button to select a PIP STEREO/SAP channel in ascending or descending order.
- Page 37 CTIVATING THE ONTROL How to position the PIP screen PROG. LIST INCR. PICT. V. DOLBY A/CH • Press the STEREO/SAP button to switch on PIP FREEZE ON/OFF POSITION screen. – SWAP PIP CH • Press the button repeatedly to your PROG.
-
Page 38: Pecifications
109 cm 127 cm 2 x 15 W NTSC M 950 cm 1130 cm 540 cm 613 cm 1142 cm 1476 cm approx. 58 kg approx. 83 kg 55PP925 140 cm 1222 cm 612 cm 1549 cm approx. 90 kg...