Cisco Catalyst 4500 Series Configuration Manual page 649

Chapter 2
profile flow
To enable Media Services Proxy (MSP), use the the profile flow command. To return to the default
setting, use the no form of this command
Syntax Description
This command has no arguments or keywords.
Command Default This command has no default settings.
Command Modes config
Command History Release
Release IOS XE
3.4.0SG and IOS
15.1(2)SG)
Usage Guidelines
You must configure the MSP profile flow command to activate the MSP platform Packet parser. This is
because the the MSP device handler is tightly coupled with MSP flow parser. Not enabling this CLI
means that MSP will not send SIP, H323 notifications to IOS sensor.
Examples The following example shows how to enable MSP:
Switch(config)# profile flow
profile flow
no profile flow
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
profile flow
2-609