Siemens HiPath 2000 Administration Manual page 129

• Lost packets (per 1000 packets): When the number of lost packets exceeds this maxi-
mum value during the observation interval, a report is created.
Default: 10.
• Consecutive lost packets: When the number of lost packets following one another ex-
ceeds this maximum value during the observation interval, a report is created.
Default: 2.
• Consecutive good packets: When the number of good packets following one another
falls below this minimum value, a report is created.
Default: 8.
Compressing codecs:
The following threshold values apply to compressing codecs.
• Lost packets (per 1000 packets): When the number of lost packets exceeds this maxi-
mum value during the observation interval, a report is created.
Default: 10.
• Consecutive lost packets: When the number of lost packets following one another ex-
ceeds this maximum value during the observation interval, a report is created.
Default: 2.
• Consecutive good packets: When the number of good packets following one another
falls below this minimum value, a report is created.
Default: 8.
General:
• Resend last report: If checked, the previous report is sent once again on pressing Sub-
mit. By default, this is unchecked.
A31003-S2010-M100-10-7619, 27/08/2008
HiPath 2000/3000/5000 - OpenStage Family, Administration Manual
administration.fm
Administration
Diagnostics
3-91