HCD-MX500i/MX550i
2-11. FFC HOLDER
Note 1: The illustration sees the CD mechanism deck block from optical pick-up block side.
3 FFC holder
Note 2: Remove the FFC holder from the
1 two claws
2-12. OPTICAL PICK-UP BLOCK (KHM-313CAA)
6 optical pick-up block
(KHM-313CAA)
1 two screws
(PTPWH M2.6)
3 insulator
5 connector
– CD mechanism deck block bottom view –
14
original set and install it again.
CD mechanism deck block
1 two screws
(PTPWH M2.6)
3 insulator
3 insulator
1 two claws
wire (flat type) (24 core)
40 mm
to BD96/BD96U
board (CN201)
The upper side
is contact side.
4 wire (flat type) (24 core)
3 insulator
2 mechanism deck
(CDM85 (CD))
2 two claws
to optical pick-up block
(KHM-313CAA)
The lower side
is contact side.
50 mm
40 mm