Philips SpeechMike II LFH5260 Service Manual page 9

Windows 98 SE and Windows ME:Note: The Windows 98 Second Edition CD contains the
USB drivers for the microphone and loudspeaker only. The drivers for the LED display and
dictation buttons must be installed from the Driver & Utility CD before connecting the
hardware.
A) Double-click the My Computer icon on the desktop.
B) Double-click the CD-ROM drive icon; you will be shown the contents of the CD.
C) Start the program autorun.exe by double-clicking it.
D) Click Install to begin installation.
E) Remove the Driver & Utility CD and insert your Windows 98 SE or Windows ME CD.
F) Plug the SpeechMike device into the USB port. Windows will find a total of five new
devices.
G) When the Add New Hardware Wizard starts, click Next.
H) On the next screen, make sure that Search for the best driver for your device.
(Recommended) is selected. Then click Next.
I) On the following screen, the only option selected should be Specify a location, and the path
of the Windows\inf folder should be displayed in the field. If necessary, uncheck all other
options and click Next.
J) Windows will now start looking for the necessary files; click Next.
Note: The required files from the Windows 98 SE or Windows ME CD can be found in the Setup/Win98 or
Setup/WinME subdirectory (respectively), browse to this directory and click OK.
K) After the first part of the installation has been completed successfully, click Finish.
L) Repeat steps 7–11 until all five SpeechMike components are installed correctly.
Software installation Note:
A user must have administrator rights to install the program under Windows 2000 or
Windows XP. Contact your system administrator if you need help.
Windows 2000 and Windows XP:
The SpeechMike software is delivered on the Driver & Utility CD. When you insert the Driver
& Utility CD into your CD-ROM drive, the SpeechMike setup program is automatically started.
Select Install to begin the installation. If the setup program is not run when you insert the
Driver & Utility CD, start setup manually by doing the following:
1.Double-click the My Computer icon on the desktop.
2.Double-click the CD-ROM drive icon; you will be shown the contents of the CD.
3.Start the program autorun.exe by double-clicking it and select Install.Windows 98 SE
and Windows ME: The SpeechMike Recorder, SpeechMike Control Application and
SpeechMike Device Configuration Tool utilities are not available for Windows 98 SE and
Windows ME. The necessary SpeechMike drivers have already been installed as part of the
hardware installation described above.
- 9 / 26-