Table of Contents
Advertisement
●
Specify the edited file name in <file name> (example: put Setting.txt CONFIG).
➠
The setting file is uploaded.
9
Enter "get reset" and press the [ENTER] key.
➠
The machine is restarted. The settings are enabled after the machine is restarted.
10
Confirm that the machine has been normally restarted, press [C] key while holding
down the [CTRL] key.
11
Enter "quit" and press the [ENTER] key.
12
Enter "exit" and press the [ENTER] key.
➠
Command Prompt exits.
LINKS
Network(P. 369)
Appendix
595
Advertisement
Table of Contents
