Philips FW P88 User Manual page 9

When you have completed the Dolby Pro
Logic setup, you are ready to enjoy Home
Cinema sound.
• Press DPL (PRO
DPL TEST T
LOGIC) repeatedly to
select and cycle
through the various
PRO LOGIC
sound modes.
Dolby Surround ™ Dolby Center
Phantom ™ Dolby 3 Stereo ™
Stereo ™ Dolby Surround ...
™ The Dolby Pro Logic display panel
will light up with the selection.
pg 01-31/P88/22-Eng 9
Dolby Surround
This setting is for a full Dolby Surround Pro
Logic mode.
• Press DPL to select the Dolby Surround
mode.
™ The message
"DOLBY
LEFT CENTER RIGHT
SURROUND"
will be
SURR SURR
displayed.
™ The DPL display panel will light up.
Dolby Center Phantom
This setting is for use without the center
speaker. It redistributes the center speaker
sound to the left and right speakers,
providing conventional stereo across the
front.
• Press DPL to select the Dolby Pro Logic
Center Phantom mode.
™ The message
"DOLBY
CENTER LEFT CENTER RIGHT
PHANTOM"
SURR SURR
will be
displayed.
™ The DPL display panel will light up.
Dolby 3 Stereo
Use this setting when full surround is not
required, but a wide stereo sound is
desired. It only requires the left, right and
center speakers.
• Press DPL to select the Dolby 3 Stereo
mode.
™ The message
"DOLBY 3
LEFT CENTER RIGHT
STEREO" will
be displayed.
SURR SURR
™ The DPL display
panel will light up.
Normal Stereo
This setting is for normal stereo sound
without Dolby Pro Logic. It only requires the
left and right speakers.
• Press DPL to select the Stereo mode.
™ The message
"STEREO" will
LEFT CENTER RIGHT
be displayed.
™ The DPL display
SURR SURR
panel will light
up.
3/6/00, 1:26 PM
DOLBY PRO LOGIC
Important!
1 For the best Dolby Pro Logic sound,
switch on DPL with DSC set to
"Classic" and with VEC off.
2 Dolby Pro Logic mode will
automatically switch to normal
Stereo mode when headphones are
connected.
3 Switch to normal stereo mode when
you record on a tape.
3139 116 19721
9