Usb Operations; Using A Usb Device; Geneal Information On Usb Device; Usb Playback - Philips FWD185 User Manual

USB Operations

IMPORTANT!
Compatibility of the USB
connection on this product:
● This product supports most USB Mass storage
devices (MSD) that are compliant to the USB
MSD standards.
– Most common Mass storage class devices are
flash drives, memory sticks, jump drives and etc.
– If you see a "Disc Drive" show up on your
computer after you plugged the mass storage
device into your computer, most likely it is MSD
compliant and it will work with this product.
– If your Mass storage device required a battery
/ power source. Please make sure you have a fresh
battery in it or charge the USB device first and
then plug it into the product again.
Supported Music type:
● This device only supports unprotected music
with the following file extension:
.mp3
● Music bought from on-line music stores are
not supported because they are secured by
Digital Rights Management protection (DRM).
● File name extensions that end with the
following are not supported:
.wav; .m4a; .m4p; mp4; .aac and etc.
No Direct connection can be made from
Computer USB port to the micro system
even you have mp3 files in your
computer.
34

Using a USB device

By connecting a USB device to the Hi- Fi
system , you can enjoy the device's stored
music through the powerful speakers of Hi-Fi
system.
Compatible USB device
With the HI- Fi system, you can use
– USB flash memory (USB2.0 or USB1.1)
– USB flash players (USB2.0 or USB1.1)
– Memory cards ( requires an additional card
reader to work with this Hi-Fi system)
Note:
– In some USB flash player (or memory devices),
the stored contents are recorded using copyright
protection technology. Such protected contents
will be unplayable on any other devices (such as
this Mini Hi- Fi system).

USB playback

You can play or view the data files (JPEG , MP3,
or DivX ) in the USB flash driver or USB memory
card reader. However, editing or copying the data
file is not possible.
1
Connect the USB flash driver/USB memory card
reader directly to the USB DIRECT socket on
this unit.
2
Press USB on the remote control (or press
SOURCE key on the system to switch to USB
mode) to access the device detected.
➜ When using multiple drives on a single card
reader, only one of the connected cards can be
accessed.
➜ The device numbers may vary with different
card readers.
3
Select the file and press OK to play.
Helpful Hints:
– When the USB device does not fit into the
USB DIRECT, a USB extension cable is required.
– You can only read and playback the content
from the USB device.
– Copy-protected contents are not playable.