Cleaning The Glass Cooktop - GE PP9830 Owner's Manual & Installation Instructions

CL
O
,,,f
O
O
U
O0
O0
C3
LD
_CZ
¢-
C
C3
U
G
Z
!
Z
,,,,J
U
a
Z
r_
£3
Cleaning the Glass Cooktop
Metal Marks and Scratches
,
Be careful not to slide pots and pans across your
cooktop. It will leave metal markings on the cooktop
surface. These marks are removable using the
CERAMA BRYTE ® Ceramic Cooktop Cleaner with
the CERAMA BRYTE ® Cleaning Pad for Ceramic
Cooktops.
2. If pots with a thin overlay of aluminum or copper
are allowed to boil dry, the overlay may leave black
discoloration on the cooktop. This should be removed
immediately before heating again or the discoloration
may be permanent.
,& WARNING:
Carefully check the bottom of
pans for roughness that would scratch the cooktop.
Damage from Sugary Spills and Melted Plastic
Special care should be taken when removing hot substances to avoid permanent damage of the glass surface.
Sugary spillovers (such as jellies, fudge, candy, syrups) or melted plastics can cause pitting of the surface of your
cooktop (not covered by the warranty) unless the spill is removed while still hot. Special care should be taken when
removing hot substances.
Be sure to use a new, sharp razor scraper.
Do not use a dull or nicked blade.
1. Turn off all surface burners and, with an oven mitt,
remove hot pans and grates.
2. Wearing an oven mitt:
a. Use a single-edge razor blade scraper
(CERAMA BRYTE ® Ceramic Cooktop Scraper) to
move the spill to a cool area on the cooktop.
b. Remove the spill with paper towels.
3. Any remaining spillover should be left until the surface
of the cooktop has cooled.
4. Don't use the surface units again until all of the
residue has been completely removed.
NOTE: If pitting or indentation in the glass surface has
already occurred, the cooktop glass will have to be
replaced. In this case, service will be necessary.
2
49 80635 2