Table of Contents
Advertisement
Light Palette Lighting Control Console
Installation & Setup Guide
RESTORING THE SOFTWARE
1. Updating or Re-Installing PaletteOS Software
If it is necessary to update or re-install the PaletteOS application onto the processor, follow the steps below.
Note: The processor always looks to removable media first upon startup for software updates. Therefore, it is
important not to leave a USB Key containing update software in the processor. This method does not archive the
install, but you can always find the software on our website. Follow the procedure below to re-install.
To update PaletteOS software:
Step 1. At Strand website, download upgrade file (file name: PaletteOSX.X.X.exe).
Step 2. Copy software file onto a USB key.
Step 3. Plug USB key into console.
Step 4. At console, close Palette console software. (Control Panel will launch.)
Step 5. From Control Panel, open File Manager.
Step 6. At folders list, locate the inserted USB key and select upgrade file (PaletteOSX.X.X.exe).
Step 7. Press [Ctrl] [C] to copy.
Step 8. Select D:\SavedInstalls folder on console hard drive.
Step 9. Press [Ctrl] [V] to paste. (The file should copy from the USB key to the console's hard drive.)
Step 10. Unplug USB key.
Step 11. Double-click D:\SavedInstalls\PaletteOSX.X.X.exe file.
Step 12. Follow all prompts to run upgrade program.
Step 13. Reboot console to complete installation.
To re-install current or previous version of PaletteOS software:
Step 1. Using Control Panel, launch File Manager. (Refer to
"Manage Files" on page
43.)
Step 2. Browse to D:\SavedInstalls directory.
Step 3. If the version you want is here and the file name is PaletteOSX.X.X.exe, then you may double-click this file
to initiate the installation process.
Step 4. If the version you want is NOT here, then follow the instructions to Update PaletteOS Software above.
59
Restoring the Software
Advertisement
Table of Contents
