Sleep Timer Setting - Philips MC M298 Owner's Manual

Clock/Timer
4
Press TITLE -/+ í / ë (ALBUM/PRESET
+/- on the remote) repeatedly to set the minute
for the timer to start.
5
Press CLOCK•TIMER (TIMER on the
remote) to store the start time.
●
At the preset time, the selected source will play.
To exit without storing the setting
●
Press Ç on the system.
Notes:
– When the preset time is reached and the
selected disc tray is empty, the next available disc
will be selected. If all the disc trays are not
available, Tuner will be selected automatically.
– During timer setting, if no button is pressed
within 70 seconds, the system will exit timer setting
mode automatically.
To deactivate the TIMER
●
Press TIMER ON/OFF on the remote control.
➜
will disappear from the display.
To activate the TIMER
●
Press TIMER ON/OFF on the remote control.
➜
will appear on the display.

Sleep timer setting

The sleep timer enables the system to switch to
standby mode automatically at a preset time.
1
Press SLEEP on the remote control repeatedly
to select a preset time.
➜
The selections are as follows (time in
minutes):
15 ™ 30 ™ 45 ™ 60 ™ OFF ™ 15 ...
2
When you reach the desired length of time, stop
pressing SLEEP.
➜
is shown, except for "OFF" mode.
➜
The sleep timer is now set.
To check the remaining length of time
after sleep timer is activated
●
Press SLEEP once.
22
To change the preset sleep timer
●
Press SLEEP again while the remaining sleep
timer is shown.
➜
The display will show the next sleep timer
options.
To deactivate the sleep timer
●
Press SLEEP repeatedly until "OFF" is displayed,
or press STANDBY-ON/ECO POWER B.
Note:
– will start flashing when the remaining
length of time after activation of the sleep timer is
less than 1 minute.