In/Out Limit Position Adjustment; In Limit Adjustment; Inch Disc Out Limit Adjustment - Sony LDP-1500P Service Manual

4-4. IN/OUT LIMIT POSITION ADJUSTMENT
4-4-1. IN Limit Adjustment
Conditions Adjustment
• Playing back a REF. disc.
Adjust RV3 on the PR-80 board so that the blinking D5 (CLV) lamp is extinguished.
• Short TP1 to E 1 on the KY-93
Be careful not to turn the RV3 excessively.
board.
• Press the S2 (
<111<111
REV) button
and the S3 ( .,. PLAY) button on
the KY-93 board simultaneously.
• Press the S2 button and the S4 When the D5 lamp is blinked, make sure that the monitor picture displays following time.
( II PAUSE) button simultane-
ously at above conditions.
I
oo :
59 : 40 :
oo
I
to
1
oo :
59 : 49 : 24
I
4-4-2. 12 inch Disc Out Limit Adjustment
Conditions Adjustment
• Playing back a REF. disc.
Adjust RV1 on the PR-80 board so that the blinking D5 (CLV) lamp is extinguished.
•Short TP1 to E1 on the KY-93
Be careful not to turn the RV1 excessively.
board.
• Turn the S6 (AUTO REPEAT)
switch off.
•PresstheS1 (.,..,.FWD) button
and the S3 ( .,. PLAY) button on
the KY-93 board simultaneously.
• Press the S 1 button and the S4
When the D5 lamp is blinked, make sure that the monitor picture displays following time.
( II PAUSE) button simultane-
ously at above conditions.
11 : 36 : 1
o : oo
I
to 11 : 36 : 19 : 24
I
4-4-3. 8 inch Disc Out Limit Adjustment
Conditions
Adjustment
• Playing back a REF. disc.
Adjust RV2 on the PR-80 board so that the blinking D5 (CLV) lamp is extinguished.
•ShortTP1 to E1 on the KY-93
Be careful not to turn the RV2 excessively.
board.
• Turn the S6 (AUTO REPEAT)
switch on.
• Press the S1 ( .,..,. FWD) button
and the S3 ( .,. PLAY) button on
the KY-93 board simultaneously.
• Press the S 1 button and the S4
When the D5 lamp is blinked, make sure that the monitor picture displayes following frame
( II PAUSE) button simultane- number.
ously at above conditions.
!
24s50
I
to
I
25099
I
4-5