8.18. Disassembly of CD Mecha-
nism Unit
• Refer to "Disassembly of Top Cabinet Assembly".
• Refer to "Disassembly of Main P.C.B."
Step 1 : Remove 2 screws.
Step 2 : Remove CD Mechanism Unit as arrow shown.
8.19. Disassembly
P.C.B.
• Refer to "Disassembly of CD Mechanism Unit"
Step 1 : Remove 3 screws.
Step 2 : Desolder pins of the Traverse Motor Unit.
Step 3 : Lift up the CD Servo P.C.B. and turn it over.
Step 4 : Detach 16P FPC at the connector (CN7001) on the CD
Servo P.C.B..
Step 5 : Remove the CD Servo P.C.B..
40
of
CD
Servo