Chapter 14
Configuring MSTP
Displaying the MST Configuration and Status
To display the spanning-tree status, use one or more of the privileged EXEC commands in
Table 14-4
Commands for Displaying MST Status
Command
show spanning-tree mst configuration
show spanning-tree mst instance-id
show spanning-tree mst interface interface-id Displays MST information for the specified interface. Valid interfaces
For information about other keywords for the show spanning-tree privileged EXEC command, see the
command reference for this release.
78-11380-12
Purpose
Displays the MST region configuration.
Displays MST information for the specified instance.
include physical ports, VLANs, and port channels. Valid VLAN IDs are 1
to 4094. The valid port-channel range is 1 to 6.
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
Displaying the MST Configuration and Status
Table
14-4:
14-23