Table of Contents
Advertisement
To adjust the LCD panel:
1
Insert a flat-headed screwdriver into
the sides of the LCD panel.
Gently apply pressure to pop the LCD
2
panel out of the UPS housing.
1
Rotate the LCD panel 180°.
2
Snap the LDC panel back into the UPS
housing.
Digital clock
Your UPS features a digital clock as part of
the LCD panel.
12
To set the time:
1
Use the sharp end of a pen to firmly
depress the hours button.
Hold the button down until the cor-
2
rect hour appears.
3
Release the button. The hour will be
set.
4
Repeat this procedure to set the
minutes, using the minutes button.
6 Storage
Follow the steps below to store your UPS.
To store your UPS:
1
Make sure the battery of the UPS is
fully charged.
Turn off the power to the UPS.
2
Unplug the UPS from the wall outlet.
3
Disconnect all equipment to the UPS.
4
5
Cover the UPS completely.
During periods of extended storage,
recharge the UPS battery every three
months to ensure battery life.
7 Warranty and Service
Limited Lifetime Warranty
Philips warrants that this product shall be
free from defects in material, workman-
ship, and assembly under normal use, in
accordance with the specifications and
warnings, for the life of this product. A
surge protector protects your equipment
by absorbing and dissipating dangerous
Advertisement
Table of Contents
