Operation - Panasonic CCR24PNA Toughbook Arbitrator User Manual

OPERATION

- Install the mounting bracket by using the screws
- Slide RX Set onto the Bracket
- Connect the main cable to RX Set
- Connect external antenna to the RX Set.
- Assemble the battery pack into TX Set
- How to change battery pack
-Separate battery cover as shown next picture.
- Separate battery pack with connector.
- Assemble the new battery pack into TX set.
-Assemble battery cover as initial.
- Before using, battery cover should be assembled completely.
- Charge TX set in the RX set for at least 3 hours (when turn off)
- Switch the power ON (located on the bottom of TX unit)
- Place TX on RX to sync the code
7