Huawei DBS3900 Installation Manual page 235

DBS3900 LampSite
Installation Guide
Figure 11-20 Installling an EXD3902 PGND cable
Figure 11-21 Correct direction for crimping an OT terminal
----End
Follow-up Procedure
1.
2.
Issue 08 (2016-05-30)
Crimp OT terminals in correct directions, as shown in Figure 11-21.
Route the cable by following the instructions in section 11.5.1 Cabling Requirements and
use cable ties to bind the cable.
Label the installed cable. For details, see section 15.5 Attaching a Sign Plate Label.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 (Optional) Installing the EXD3902 and Cables
228