Technical Specifications - Philips 0 User Manual

10 Technical Specifications

This product is in conformity with the requirements of the 95/47/EC and 2002/21/EC directives.
Video Decoding
- MPEG-2 DVB compliant up to MP@ ML
- Video bit rate: up to 15 Mbit /sec
- Video format: 4:3 (letter box or
Pan & scan if source
is in 16:9) and 16:9
- Resolution: up to 720x576 pixels
Audio Decoding
- MPEG layer I / II
Ease of installation
- Automatic program installation via scanning
- Program editing for personalised installation
(delete, add, move)
Ease of use
- Automatic program list update
- Direct access TV & Radio modes-Full remote
controlled
- Multibrand remote control(TV, VCR, DVD,
Audio AMP-Tuner)
- Automatic recording via:
Timer programming by tagging in banner and
Easy recording for Philips VCR and DVD+RW
recoders
- Now & Next program in banner
- EPG list per channel based on EIT schedule
Operation/Features
- Receiver compatible with services based on
MHP
- 1000 presets
- Skip program
- Free to air reception
- DVB Subtitles
- Parental lock with PIN code
- Channel lock with PIN code
- Menu controlled installation and operation
using On Screen Display
- 8 event VCR timer / Reminder
- Automatic VCR play back: Audio L/R + CVBS
or RGB / Fast blanking
- Full range RF loop-through
- Software upgrade via over the air download
- Rotary 4x7 digit LED display
- Dolby Digital bit-stream audio out
Application System
Resources
Processor clock speed 180 MHz
SDRAM - CPU/Video-Graphics 40 MB
Flash memory 8 MB
EEPROM 16 kB
Graphics resolution 16 bits
Terrestrial antenna interface
- RF input: IEC 169-2
female connector
- RF output (bypass): IEC 169-2 male
connector
Reception-Demodulation
- Demodulation type: COFDM 2K / 8K
- Network: MFN /SFN
- Input frequency range: VHF III & UHF IV / V
- Loop-through frequency
range (MHz): 47 - 862 MHz
Secured transaction
For future application - Italy only
Smart card type: Citizen card
Interface: OCF based
De-scrambling
Finland only
Type: DVB
Implementation: Embedded
Smart card (not supplied): 1 for CA
CA system: Conax
Note: Subscription is required to watch Pay-TV.
Connections
TV SCART:
Output: CVBS or RGB / Fast blanking
Volume controlled audio L/R, Slow
blanking outputs
VCR SCART
- Input: CVBS or RGB / Fast blanking, Slow
blanking , Audio L/R
- Output: CVBS , Audio L/R, Slow blanking
during timer if "Prepare Record"
mode is activated
Audio CINCH
- Analog audio output: L / R
- Digital audio output: PCM or AC3
T E C H N I C A L S P E C I F I C AT I O N S 41
Serial interface:
- Type RJ 9
Modem
- Type V90
- interface RJ 11
Smart card reader
- Type: ISO 7816
Accessories
- Remote control
- Scart cable
- User manual
- Worldwide Guarantee booklet
- Batteries: 2 x 1.5V type AA/R06
- RF cable
- Telephone cord
- Mains cord
- Stand for using the receiver in the upright
position
Miscellaneous
- Temperature range (°C)
Operating +5 to 45
Storage -10 to +70
- Mains: 230 V ~ +/-10%
50 Hz
- Power consumption: < 15W
- Standby consumption: < 6 W
- Low power < 1 W
- Weight
Product 1.5 kg
Including packaging 2.0 kg
- Dimensions:
Product 260 x 225 x 60 mm
Packaging 395 x 275 x 90 mm
Multi-language
Menu
- English, Italian, Finnish, Swedish, Spanish,
French, German, Polish.
User manual
- English, Italian, Finnish, Swedish, Spanish,
French, German.
AC3® is a regisred trademark of Dolby Laboratoties
Licensing Corporation.
Dolby® is a regisred trademark of Dolby
Laboratoties Licensing Corporation.
Due to continued product improvements, this
information is subject to change without notice.