Selecting Operation Mode - D-Link DIR-825/AC Quick Installation Manual

DIR-825/AC Quick Installation Guide

Selecting Operation Mode

In order to connect your device to a wired ISP, on the Device mode page,
from the Connection method list, select the Wired connection value.
Then from the Work mode list select the Router value. In this mode you can
configure a WAN connection, set your own settings for the wireless network,
configure LAN ports to connect an STB or VoIP phone, and set your own
password for access to the web-based interface of the device.
In order to connect your device to the network of a 3G or LTE operator, on the
Device mode page, from the Connection method list, select the 3G/LTE
modem value. In this mode you can configure a 3G/LTE WAN connection,
set your own settings for the wireless network, and set your own password for
access to the web-based interface of the device.
19