The Ipronto's External Controls - Philips 6400 Installation Manual

Using the iPronto

The iPronto's External Controls

The Power Button
The iPronto's Power button (located on the left side of the iPronto) is used to switch the iPronto on when it is powered
off. In the System Settings you can decide on other options for powering on the iPronto. See Adjusting the Power On
Settings on page 19.
You can also use the Power button to switch the iPronto off at any time.
The Remote Control buttons
The iPronto has five buttons on the front panel. They always operate the iPronto's Remote Control (RC): When you are
working with the iPronto's Electronic Program Guide or browser, these buttons will still have RC functions. By default,
the RC buttons have the following functions:
iPronto User Guide
channel up
and channel
down
volume up
and volume
down
mute
You can change these default functions with
the iPronto's "learning" tool. This means that
the iPronto will learn an IR (infrared) code
from the existing RC of your device, for
instance your TV. See Learning IR Codes on
page 38.
28