Table of Contents
Related Manuals for NEC Express5800/53Xi
Summary of Contents for NEC Express5800/53Xi
- Page 1 NEC Express Workstation Express5800 Series Express5800/53Xi, Y53Xi User's Guide Chapter 1 General Description Chapter 2 Preparations Chapter 3 Setup Chapter 4 Appendix 50.106.01-101.01 September 2014, First Edition © NEC Corporation 2014...
-
Page 2: Documents For This Product
Chapter 2: Useful Features Describes useful features of the workstation and the detail of system BIOS settings, RAID Configuration Utility, and EXPRESSBUILDER. Chapter 3: Appendix Shows the list of error messages and Windows event logs. Other documents Provides the detailed information about NEC ESMPRO, Universal RAID Utility, and other features. Express5800/53Xi, Y53Xi User's Guide... -
Page 3: Table Of Contents
3.2 Managing Version of Firmware and Software ................36 4. Names and Features of Component ....................... 37 4.1 Front View ..........................37 4.2 Rear View ..........................38 4.3 Internal View ..........................39 4.4 Motherboard ..........................40 4.5 LEDs ............................41 Express5800/53Xi, Y53Xi User's Guide... - Page 4 3.2 Usage of EXPRESSBUILDER ....................76 4. Installing Software Components ........................77 5. Turning Off the Workstation ..........................78 6. Power-Saving Mode ............................79 Chapter 4 Appendix ..............................80 1. Specifications ..............................81 2. IRQ and I/O Port Address ..........................82 Express5800/53Xi, Y53Xi User's Guide...
-
Page 5: Notations Used In This Document
• DVD-ROM drive • DVD Super MULTI drive • Blu-ray disk drive Removable media Unless otherwise stated, removable media described in this document refer to both of the following. • USB flash drive • Flash FDD Express5800/53Xi, Y53Xi User's Guide... -
Page 6: Abbreviations Of Operating Systems
Windows 7 Windows 7 Professional (32-bit Edition) Includes 64-bit and 32-bit Editions unless otherwise stated. The following appears on EXPRESSBUILDER. Windows 7 (64-bit Edition): Windows 7 x64 Windows 7 (32-bit Edition): Windows 7 x86 Express5800/53Xi, Y53Xi User's Guide... -
Page 7: Trademarks
Trademarks Trademarks EXPRESSBUILDER, ESMPRO, and ExpressUpdate are registered trademarks of NEC Corporation. Microsoft, Windows, Windows Server, Windows Vista, and MS-DOS are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. Intel, XEON, Intel Core, Pentium, Celeron, and Intel vPro are registered trademarks of Intel Corporation of the United States. -
Page 8: Regulatory Notices
Temporary regulations on content limit for certain hazardous substances in electrical products". Laser Safety Standards For the model with an optical drive, an optical drive that conforms to Class I laser safety standards (IEC60825-1) is installed. Express5800/53Xi, Y53Xi User's Guide... -
Page 9: Warnings And Additions To This Document
This document is subject to change at any time without notice. Do not make copies or alter the document content without permission from NEC Corporation. If you have any concerns, or discover errors or omissions in this document, contact your sales representative. -
Page 10: Precautions For Use (Be Sure To Read)
This symbol indicates prohibited actions. An image in the Action symbol illustrates a particular prohibited action. (Do not disassemble) (Example) This symbol indicates mandatory actions. Mandatory An image in the symbol illustrates a mandatory action to Action avoid a particular hazard. (Disconnect a plug) Express5800/53Xi, Y53Xi User's Guide... -
Page 11: Symbols Used In This Document And On Warning Labels
Mandatory Actions Unplug the power cord of the workstation. Make sure equipment is properly grounded. Otherwise, an electric shock or fire may be Otherwise, an electric shock or fire may be caused. caused. Express5800/53Xi, Y53Xi User's Guide... -
Page 12: Safety Notes
Failure to follow this warning may cause an electric shock, a fire, or failure of the workstation. When such things accidentally enter the workstation, immediately turn off the power and disconnect the power plug from the outlet. Do not disassemble the workstation, and contact your maintenance service company. Express5800/53Xi, Y53Xi User's Guide... -
Page 13: Power Supply And Power Cord Use
Heat generation resulting from a halfway inserted power plug (imperfect contact) may cause a fire. Heat will also be generated if condensation is formed on dusty blades of the halfway inserted plug, increasing the possibility of fire. Express5800/53Xi, Y53Xi User's Guide... -
Page 14: Installation, Relocation, Storage, And Connection
Use only the specified interface cable. Use only interface cables provided by NEC and locate a proper device and connector before connecting a cable. Using an unauthorized cable or connecting a cable to an improper destination may cause a short circuit, resulting in a fire. -
Page 15: Cleaning And Working With Internal Devices
If the workstation is off-powered but its power cord is plugged to a power source, touching an earth wire may cause an electric shock or a fire resulted from a short circuit. Express5800/53Xi, Y53Xi User's Guide... - Page 16 Leave the workstation until its internal components fully cool down before installing/removing any component. Secure cables or cards in place Be sure to secure the power cord, interface cables, and cards in place. Incomplete installation causes a contact failure, resulting in smoke or fire. Express5800/53Xi, Y53Xi User's Guide...
-
Page 17: During Operation
Failure to observe this warning may cause your hands or hair to catch in the fan, resulting in personal injury. Pay attention to hot surface. Do not touch around the PCI card during operation or immediately after the power off. Doing so may cause a burn because the PCI card may get very hot. Express5800/53Xi, Y53Xi User's Guide... -
Page 18: Warning Labels
(Do not remove or black out this label and keep it clean). If no label is attached or printed on the workstation, or if there is a label coming off or stained, contact your sales representative. * Depending on server model, the caution statement in Chinese may not be printed on the label. Express5800/53Xi, Y53Xi User's Guide... -
Page 19: Précautions Pour L'usage (Il Est Recommandé De Bien Lire Ces Instructions)
Ne démontez pas Exemple Ce symbole signale des actions qui sont obligatoires. Une Action image dans le symbole illustre une action obligatoire pour obligatoire éviter un risque particulier. Déconnectez une prise Express5800/53Xi, Y53Xi User's Guide... -
Page 20: Symboles Utilisés Dans Ce Document Et Sur Les Étiquettes De Mise En Garde
Assurez-vous que l'équipement est mis correctement travail. Si cette précaution n’est pas observée, une à la terre. Si cette précaution n’est pas observée, une décharge électrique ou un incendie peut être causé. décharge électrique ou un incendie peut être causé. Express5800/53Xi, Y53Xi User's Guide... -
Page 21: Notes Sur La Sécurité
Si de tels éléments pénètrent accidentellement dans le poste de travail, interrompez immédiatement le courant et détachez la prise d’alimentation de la prise de sortie. Ne démontez pas le poste de travail, et contactez votre société de service de maintenance. Express5800/53Xi, Y53Xi User's Guide... -
Page 22: Utilisation De L'alimentation Électrique Et Du Câble D'alimentation
La génération de chaleur provenant d'une prise d’alimentation insérée à mi-chemin (avec un mauvais contact) risque de provoquer un incendie. De la chaleur sera également produite si une condensation est formée sur les lames poussiéreuses de la prise insérée à mi-chemin, ceci augmentant tout risque d’incendie. Express5800/53Xi, Y53Xi User's Guide... -
Page 23: Installation, Relocalisation, Stockage Et Connexion
à la suite d'un court-circuit. Utilisez seulement le câble d'interface spécifié. Utilisez seulement les câbles d'interface fournis par NEC et placez l’appareil et le connecteur appropriés avant de connecter le câble. L’utilisation d’un câble non autorisé ou le raccordement d’un câble dans un but incorrect risque de provoquer un court-circuit, ayant comme résultat un incendie. -
Page 24: Nettoyage Et Opération Avec Les Dispositifs Internes
à une source d’alimentation, si vous touchez un fil de mise à la terre, vous pouvez provoquer une décharge électrique ou un incendie résultant d'un court-circuit. Express5800/53Xi, Y53Xi User's Guide... - Page 25 Fixez les câbles ou les cartes en position. Assurez-vous de bien fixer le câble d’alimentation, les câbles d'interface et les cartes en position. Une installation incomplète causera un défaut de contact, causant ainsi de la fumée ou un incendie. Express5800/53Xi, Y53Xi User's Guide...
-
Page 26: Durant Le Fonctionnement
Ne touchez pas autour de la carte PCI durant le fonctionnement de l’appareil ou juste après sa mise hors tension. Si vous n’observez pas cette précaution, vous risquez de causer une brûlure car la carte PCI peut devenir très chaude. Express5800/53Xi, Y53Xi User's Guide... -
Page 27: Étiquettes De Mise En Garde
étiquette se détachant ou qui est souillée, veuillez entrer en contact avec votre représentant de commerce. * Selon le modèle du serveur, la déclaration de précaution en chinois pourrait ne pas être imprimée sur l’étiquette. Express5800/53Xi, Y53Xi User's Guide... -
Page 28: Handling Precautions For Proper Operations
Tape media: Approximately 1 day • For optional devices, we recommend you use our NEC genuine products. Even if they are successfully installed or connected, installation of unsupported devices can cause the workstation to malfunction or even failure. You will be charged to repair failure or damage caused by use of such products even within warranty period. -
Page 29: Handling Precautions (Anti-Static Measures)
The device contains static-sensitive electronic components. When installing or uninstalling the optional – device, wear an anti-static wrist strap on your wrist to avoid a failure caused by the static electricity. To use the strap, connect the wire to the chassis. Express5800/53Xi, Y53Xi User's Guide... - Page 30 Keeping your equipment clean is important not only for the appearance but also for functional and safety reasons. A dusty monitor makes it difficult to see the display contents, so clean it regularly. Take rest breaks When you feel tired, take a break. Light exercise is also recommended. Express5800/53Xi, Y53Xi User's Guide...
-
Page 31: Chapter 1 General Description
1. Introduction 2. Accessories Describes the accessories of the workstation. 3. Features Describes the features of the workstation and system management. 4. Names and Features of Component Describes the names and features of components of this workstation. Express5800/53Xi, Y53Xi User's Guide... -
Page 32: Introduction
Introduction Thank you for purchasing our NEC Express workstation. NEC’s latest technology and architectures realize high-power and high-speed operation for this workstation. Read thoroughly this document before using the workstation to fully understand handling of Express5800 Series workstation and appreciate its functions to the maximum extent. -
Page 33: Accessories
The chassis serial number plate and maintenance label is located on the workstation. If the serial number does not match the number on the warranty, you may not be guaranteed against failure even within the warranty period. Contact your sales representative if they do not match. Express5800/53Xi, Y53Xi User's Guide... -
Page 34: Features
• NEC ExpressUpdate feature RAID System management utility (Universal RAID Utility) • Self-diagnosis Easy setup • Power On Self-Test (POST) • EXPRESSBUILDER (system setup utility) • Test and Diagnosis (T&D) utility • SETUP (BIOS setup utility) Express5800/53Xi, Y53Xi User's Guide... -
Page 35: Management Features
The hardware components of the workstation provide operation control/reliability features as shown below. Additionally, NEC ESMPRO Agent enables you to collectively manage the state of your systems. You can also monitor the workstation states by network from "PC for Management" on which NEC ESMPRO Manager is installed. -
Page 36: Managing Version Of Firmware And Software
3. Features Managing Version of Firmware and Software NEC ESMPRO Manager and ExpressUpdate Agent can manage the version of the firmware and software of the workstation. Using NEC ESMPRO Manager, you can download update packages automatically and install it to several modules simply without terminating the system. -
Page 37: Names And Features Of Component
(Depending on installed optional boards, the feature is unavailable.) If you press and hold the POWER/SLEEP switch for several seconds, the workstation is forcedly powered off. Express5800/53Xi, Y53Xi User's Guide... -
Page 38: Rear View
Connects equipment having a Line Out terminal. Connects a microphone. (13) Line Out Terminal (also used for headphone) (7) DUMP Switch Connects equipment having a Line In terminal. Collects a memory dump if an error occurred. Express5800/53Xi, Y53Xi User's Guide... -
Page 39: Internal View
4. Names and Features of Component Internal View (5) (6) (1) Cooling fan (front) (6) Cooling fan (CPU) (2) Power supply unit (7) Motherboard (3) PCI card (8) Optical disk drive (4) Cooling fan (rear) (9) Hard disk drive (5) DIMM Express5800/53Xi, Y53Xi User's Guide... -
Page 40: Motherboard
(6) Connectors for external devices (16) Connector for power supply unit (7) Connector for rear cooling fan (17) Connector for front cooling fan (8) DIMM slot (18) Speaker connector (9) CPU socket (19) Front panel connector (10) Front panel connector Express5800/53Xi, Y53Xi User's Guide... -
Page 41: Leds
DISK Access LED The DISK access LED lights green while any of internal hard disk drive is accessed. 4.5.3 Optical Disk Access LED The Optical disk access LED lights while the optical disk drives accesses the media. Express5800/53Xi, Y53Xi User's Guide... -
Page 42: Link/Act Led
This LED indicates which network interface is used. SPEED LED pattern Description On (amber) The port is operating with 1000BASE-T interface. On (green) The port is operating with 100BASE-TX interface. The port is operating with 10BASE-T interface. Express5800/53Xi, Y53Xi User's Guide... -
Page 43: Optical Disk Drive
• Regularly clean the tray. Pay attention not to touch the lens when cleaning the tray. Media Use the genuine NEC product or recommended product to avoid malfunction. • Genuine product The separately priced disks for optical disk drive are available as shown below. - Page 44 When replaying the music media, use Windows Media Player. Make sure that [Digital replay] has been checked in [Option] tab. Purpose of optical disk Use the optical disk only for temporary backup. Do not use the optical disk for backup of important data. Express5800/53Xi, Y53Xi User's Guide...
-
Page 45: Setting/Removing Media
Eject button is disabled while the media in the drive is being accessed (Access LED is lit). Some OS command can eject the tray. After taking out the optical disk, return the tray into the drive. Express5800/53Xi, Y53Xi User's Guide... -
Page 46: When You Fail To Eject
Hold the tray and pull it out. Take out the optical disk. Push the tray back into position. 4.6.4 Data loss NEC assumes no liability for data loss due to malfunction of the optical disk drive. Express5800/53Xi, Y53Xi User's Guide... -
Page 47: Handling Of The Optical Disk
The optical disk drive of the workstation has a feature to detect the condition of media and adjust the read/write speed to get an optimum speed. Thus, the time required for reading or writing changes depending on disk condition. Express5800/53Xi, Y53Xi User's Guide... -
Page 48: Chapter 2 Preparations
Express5800/53Xi, Y53Xi Preparations This chapter describes preparations for using the workstation. 1. Installing Internal Options Describes how to install the internal options. 2. Installation and Connection Describes how to locate the workstation and connect the cables. Express5800/53Xi, Y53Xi User's Guide... -
Page 49: Installing Internal Options
This section describes how to install or remove optional devices, and notes on using them. • Use the options and cables approved by NEC. You will be charged by any repair Important of a malfunction, fault, or defect occurring in a workstation in which one or more components not approved by NEC are used. -
Page 50: Anti-Static Measures
Keep any component in an anti-static bag until you actually install it to the workstation. – Hold a component by its edge to avoid touching any terminals or components. – – To store or carry any component, place it in an anti-static bag. Express5800/53Xi, Y53Xi User's Guide... -
Page 51: Preparing For Installation And Removal
If the chassis is locked, unlock it. Remove the stabilizers according to Chapter 2 (2.1.1 Preparation for Installation). Lay down the workstation so that its cover faces upward. Remove the three screws to remove the cover. Express5800/53Xi, Y53Xi User's Guide... -
Page 52: Hard Disk Drive
Install the first hard disk drive in drive bay 0, and the second one in drive bay 1. Important Do not use any hard disk drive that is not authorized by NEC. Installing a third-party hard disk drive may cause a failure in the workstation as well as the hard disk drive. - Page 53 Disconnect the cable from the optical disk drive. Remove the two screws and then remove the optical disk drive. Remove the cable from the hard disk drive already installed. Remove the two screws and then remove the cage. Express5800/53Xi, Y53Xi User's Guide...
- Page 54 Reassemble the workstation. Removal Remove the hard disk drive in reverse order of installation procedure. Note To transfer or dispose of the removed hard disk drive, see Chapter 1 (1. Transfer, Relocation, and Disposal) in Maintenance Guide. Express5800/53Xi, Y53Xi User's Guide...
-
Page 55: Onboard Raid Controller
If either of the hard disk drives fails, the other hard disk drive containing the same data can substitute for the failed hard disk drive. Thus the system can continue to operate without interruption. Express5800/53Xi, Y53Xi User's Guide... - Page 56 You must avoid static electricity to work with the procedure below. For details, see Chapter 2 (1.2 Anti-static Measures). See Chapter 2 (1.3 Preparing for Installation and Removal) for preparations. Change the jumper switch setting. Reassemble the workstation. Express5800/53Xi, Y53Xi User's Guide...
-
Page 57: Pci Card
Secure the riser card to the center bar with four screws. Remove the cover from the slot. Note Keep the removed cover for future use. Express5800/53Xi, Y53Xi User's Guide... - Page 58 Install the riser card to the workstation. Put the riser card to the catch on the chassis, and slide it downward. Reassemble the workstation. Turn on the power of the workstation. Make sure that no error message appears on the POST screen. Express5800/53Xi, Y53Xi User's Guide...
- Page 59 Important If the PCI card is installed in PCI Express(x16) slot, remove the card while pushing the lock of PCI Express slot from the other side. Pay attention not to apply excess force to the lock. Express5800/53Xi, Y53Xi User's Guide...
-
Page 60: Dimm
Install a Dual In-line Memory Module (DIMM) in a DIMM slot on the motherboard. The motherboard is equipped with four slots for installing DIMMs. • Use only DIMM authorized by NEC. Installation of a third party's DIMM will cause Important damage not only to the DIMM but also the workstation. If the workstation needs repair resulting from the use of a third party's product, it is repaired at a cost even during the guarantee period. - Page 61 Make sure that no error message appears on the POST screen. Run BIOS SETUP Utility to make sure that the installed DIMMs are correctly detected by BIOS. Change the paging file size. Removal Remove the DIMM in reverse order of installation procedure. Express5800/53Xi, Y53Xi User's Guide...
-
Page 62: Installation And Connection
Be sure to read "Precautions for Use" described in "Getting Started!" and "User's Guide" to use the workstation safely. Installation The following figure illustrates a suitable place for locating the workstation. Firmly hold the workstation, and put it on the floor slowly and carefully. Express5800/53Xi, Y53Xi User's Guide... - Page 63 • Places near a device generating intense magnetic field such as a TV, radio, broadcast/communication antenna, power transmission wire, and electromagnetic crane • Do not install the workstation near equipment that generates power noise. Express5800/53Xi, Y53Xi User's Guide...
-
Page 64: Preparation For Installation
Lift the lock plate on the stabilizer and slide it toward the direction shown in the figure, and remove the stabilizer. (b) Installation Engage the hooks on the stabilizer with the slots on the workstation, and insert them. Express5800/53Xi, Y53Xi User's Guide... - Page 65 Chapter 2 Preparations 2. Installation and Connection With horizontal installation If you want to install the workstation horizontally, attach the four rubber feet as shown in the figure below. Express5800/53Xi, Y53Xi User's Guide...
-
Page 66: Connection
• Use the shielded cable for LAN and USB port. • Pay attention that the power cord plug is not pressured. Tips Do not connect the leased line directly to serial port. Express5800/53Xi, Y53Xi User's Guide... -
Page 67: Power Cord
(UPS), run BIOS Setup Utility, choose [System Hardware] → [AC-LINK] and change the setting. See Chapter 2 (1. System BIOS) in Maintenance Guide. Tips Use the separately priced power cord (bipolar grounded) specified by NEC to connect with UPS. Express5800/53Xi, Y53Xi User's Guide... -
Page 68: Chapter 3 Setup
Describes the feature of EXPRESSBUILDER. 4. Installing Software Components Describes how to install the OS and bundled software. 5. Turning Off the Workstation Describes power-off procedure. 6. Power-Saving Mode Describes procedures for shifting to power-saving (standby) mode. Express5800/53Xi, Y53Xi User's Guide... -
Page 69: Turning On The Workstation
If the power cord is connected to UPS, make sure that the UPS is turned on. Press POWER/SLEEP Switch on the front of the workstation. POWER/SLEEP LED on the front of the workstation lights green. In a few seconds, the NEC logo appears on the screen. -
Page 70: Post
The following describes the progress of POST in order. When the workstation is turned on, POST runs. With the factory settings, the NEC logo appears on the display while POST is in progress. If <Esc> key is pressed, the logo disappears and the details of POST are displayed. -
Page 71: Post Error Messages
If POST detects an error, an error message appears on the screen or a beep code sounds. Write down the displayed message before calling your sales representative. The error message is useful information for maintenance. For details, see Chapter 3 (1. POST Error Message) in Maintenance Guide. Express5800/53Xi, Y53Xi User's Guide... -
Page 72: System Bios Setup
Press <F2> SETUP, <F4> ROM Utility, <F12> Network When you press <F2> key at this time, SETUP starts and displays Main menu upon completion of POST. You can also press <F2> key while NEC logo appears to display Main menu. Express5800/53Xi, Y53Xi User's Guide... -
Page 73: Usage Of Setup
<F9> key Sets the parameter of the currently displayed item back to the default setting. Depending on the item, the default setting differs from the factory setting. <F10> key Saves the current settings and exits SETUP. Express5800/53Xi, Y53Xi User's Guide... -
Page 74: Cases That Need Using Setup
OFF even when UPS supplies power. Setup Change AMT setting. [System Hardware] → See Chapter 2 (2. AMT Teaming (Enable ME BIOS Configuration) in Maintenance [ME BIOS Extension] → [Enabled] Extension.) Guide for details of ME BIOS Extension. Express5800/53Xi, Y53Xi User's Guide... - Page 75 If you want to return the settings to default settings, choose [Exit] → [Load Setup Defaults]. The default settings are different from the factory settings. All of the factory settings are shown in Chapter 2 (1. System BIOS) in Maintenance Guide. Express5800/53Xi, Y53Xi User's Guide...
-
Page 76: Expressbuilder
You can check your workstation by using EXPRESSBUILDER. Features of EXPRESSBUILDER EXPRESSBUILDER provides the following features. Feature Description Stores bundled software such as NEC ESMPRO Agent. Bundled software Diagnoses your workstation. Maintenance Stores various documents such as User’s Guide, Installation Guide and Instruction manual Maintenance Guide. -
Page 77: Installing Software Components
Chapter 3 Setup 4. Installing Software Components Installing Software Components Continue to install software components such as OS. See the instructions below. • Express5800/53Xi, Y53Xi Installation Guide (Windows) Express5800/53Xi, Y53Xi User's Guide... -
Page 78: Turning Off The Workstation
Turn off the workstation by using the following procedure. If the power cord of the workstation is connected to a UPS, refer to the documentation supplied with the UPS, or the documentation for the application controlling the UPS. Shut down the OS. Turn off peripheral devices. Express5800/53Xi, Y53Xi User's Guide... -
Page 79: Power-Saving Mode
Tips Entering into the power-saving mode and returning to normal mode depends on setting on OS. The operational level in the power-saving mode depends on the OS in use. Express5800/53Xi, Y53Xi User's Guide... -
Page 80: Chapter 4 Appendix
NEC Express5800 Series Express5800/53Xi, Y53Xi Appendix 1. Specifications Describes specification of the workstation. 2. IRQ and I/O Port Address Describes factory-set IRQ and I/O port addresses. Express5800/53Xi, Y53Xi User's Guide... -
Page 81: Specifications
If the system clock is installed in a system requiring high time precision, it is recommended to use a time server (NTP server). Since the workstation supports power-saving mode, the power supply unit may beep when you turned off the workstation. Express5800/53Xi, Y53Xi User's Guide... -
Page 82: Irq And I/O Port Address
PCI1, PCI2, USB2, Display Adapter, MEI, USB3.0 PCI IRQ 17 PCI IRQ 18 LAN2 PCI IRQ 19 SATA1, SATA2, SOL PCI IRQ 20 LAN1 PCI IRQ 21 – PCI IRQ 22 Audio PCI IRQ 23 USB1 Express5800/53Xi, Y53Xi User's Guide... - Page 83 1F0 - 1F7 IDE controller (primary) 2F8 - 2FF Serial port IDE controller (secondary) IDE controller (primary) 3F8 - 3FF Serial port 4D0 - 4D1 Chipset CF8, CFC Chipset Chipset A35 - A36 Hardware monitor * Hexadecimal notation Express5800/53Xi, Y53Xi User's Guide...