Code Entry; Direct Code Entry; Code Search - Philips Magnavox PM3 User Manual

Code Entry

Direct Code Entry

1. Press and hold the
red indicator stays on, then release the
button.
SEARCH
2. Press and release the desired mode button (
etc.). The red indicator blinks, then stays lit.
3. Enter the 3 digit code from the code tables (on
separate sheet). Note: after a valid code entry, the
red indicator turns off. For an invalid code, the red
indicator flashes.
4. With your device on, press
device responds, no further programming is
required. Note: If some buttons do not operate your
equipment, try one of the other codes for your
brand.
TV
2.
QU IT
INFO
SELECT
SLEEP
1.
3.
Write your codes down here for easy reference later.
Type Type stored
TV
VCR
DVD
Cable
button until the

CODE SEARCH

CODE
. If the
CHANNEL UP
POWER
VCR
DVD
CBL
OK
ME NU
IN /O UT
CODE SUB PREV.
SEARCH TITLE CHAN
REPEAT
Code
TV
10
Code Entry, cont.
Programming with Code Search
If your product does not respond after you have tried all
the codes for your brand, or if your brand is not listed,
try searching for your code by following these steps.
, ,
TV VCR
1. Manually turn on the device (
controlled.
2. Press and hold the
red indicator stays on, then release the
SEARCH
3. Press and quickly release the desired mode button
(
TV
4. Press the
times) until the device to be controlled changes
channel. The red indicator blinks off with each
button press. If you accidentally overshoot the
code required, press the
to backtrack through the library until the device
changes channel. Pressing
direction to forward again.
5. Press and release
Most users will store
Satellite codes under
to store a
for Direct Code Entry (page 10) and press
of Direct Code Entry, then enter ANY VCR code in step 3
of Direct Code Entry. Then follow the steps above for
Code Search (or Brand Search, page 12).
Note: If the device does not have a
button, use
Search starts from the currently stored three digit
number under that mode.
3.
2.
CODE SEARCH
button.
, , etc.). The red indicator blinks off once.
VCR
button repeatedly (up to 300
CHANNEL UP
CHANNEL DOWN
to install the code.
MUTE
codes under the
VCR
, etc. If (for example) you want
SAT
code under , first follow the procedure
VCR
SAT
( only) or
VCR
PLAY
VCR
DVD
TV
QU IT
OK
INFO
SELECT
CODE SUB
SLEEP SEARCH TITLE
11
, , etc.) to be
TV VCR
button until the
CODE
button
changes
CHANNEL UP
button,
VCR
in step 2
SAT
CHANNEL UP
instead. Code
POWER
CBL
4.
5.
MENU
IN /OU T
PREV.
CHAN
REPEAT