Sharp GF-4949ZS Service Manual page 3

Caution:
Prior to the disassembly, be sure to remove the AC power
supply cord, cassette tape and batteries from the unit.
F R O N T C A B I N E T R E M O V A L
n
(Refer to Figures 3-1 and 3-2.)
1. Remove five screws @ and four knobs @j).
2. Pull the front cabinet frontward by holding its upper
part and disconnect three tips 0.
M E C H A N I S M B L O C K R E M O V A L
n
(Refer to Figure 3-2.)
1. Remove two screws @ .
2. Disconnect two sockets 0 .
3. Unsolder two tips @ and then the mechanism block
can be removed.
MAIN P.W.B. REMOVAL
q
(Refer to Figure 3-3.)
2. Remove the LED P.W.B. from two stoppers @ .
Then the main P.W.B. can be removed from the back
cabinet.
(Refer to Figure 3-3.)
2. Disconnect one socket@.
the parts in the numerical order as shown in Figure 3-4.
2) Turn the tuning control shaft fully counterclockwise, and
fix it with the pointer aligned with the zero (0) point on
the frame. See Figure 3-5.
Figure 3-5
DISASSEMBLY
DIAL CORD STRINGING
Figure 3-l
Figure 3-3
Drum (I 15)
Figure 3-4
Spring