Recording On A Video Cassette Tape 33 - Philips DV900VHS Owner's Manual

Digital video disc player & video cassette recorder
Hide thumbs Also See for DV900VHS:
Table of Contents

Advertisement

VCR
Read and follow the steps below to record a television program
onto a video cassette tape. Before you begin, make sure the
DVD/VCR is in VCR mode. Press the DVD/VCR OUTPUT button
so that the green VCR light appears on the front of the
DVD/VCR.
1
Turn on the TV and set it to channel 3 or 4, whichever
channel the CH3/CH4 switch on the back of the DVD/VCR is set
to. Or, if you connected the DVD/VCR to the TV using audio and
video cables, select the correct audio and video in channel at the
TV. Details are on page 12.
2
Insert a tape with its record tab intact into the cassette
compartment of the DVD/VCR. If tape playback begins, press
the STOP button.
3
If the VCR/TV light appears on the front of the DVD/VCR, go to
step 4. If the VCR/TV light does not appear, press the VCR
button, then press the VCR/TV button once.
4
Press the SPEED button until the desired tape speed
appears briefly on the screen. (Details about tape speed are on
page 38.)
5
Use the CHANNEL o/p buttons or the Number buttons
to select the TV channel to be recorded.
6
Press the RECORD button once to start recording. The
RECORD light will appear.
7
To pause the recording, press the PAUSE button once.
The RECORD light will flash. To resume recording, press the
RECORD button or press the PAUSE button again. The
RECORD light will come on again.
8
To stop recording, press the STOP button.

Recording on a Video Cassette Tape 33

3
5
4
1
Turn on the TV.
2
Insert a tape in the
DVD/VCR.
POWER
TIMER SET
DVD/VCR
VCR/TV
MEMORY
OUTPUT
DVD
VCR
PLAY
REW
F.FWD
STOP
PAUSE
1
2
3
4
5
6
SLOW
7
8
9
SPEED
+10
0
DISPLAY
CLEAR
SEARCH MODE
REPEAT
TIME SEARCH
STATUS/EXIT
MENU
TITLE
ENTER
RETURN
SETUP
MODE
AUDIO
SUB TITLE
Helpful Hints
• If you press the RECORD button
when there is not a tape in the
DVD/VCR, NO CASSETTE will flash
on the screen.
• If you press the RECORD button
while a tape without a record tab is
in the DVD/VCR, the DVD/VCR will
eject the tape and PROTECTED
CASSETTE CANNOT RECORD will
flash on the screen.
• Other recording options are on
pages 34-40.
• You can change the tape speed dur-
ing a recording, but some distortion
will appear on the tape.
• The DVD/VCR will record in a pre-
set volume.
8
6
7
A B
ANGLE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv900vhs99Dv900vhs98

Table of Contents