Remote Control - LG 19LV2500 Owner's Manual

90
EXTERNAL CONTROL DEVICE SETUP
RS-232C configurations
7-Wire Configuration
(Serial female-female NULL modem cable)
PC TV
RXD 2 3 TXD
TXD 3 2 RXD
GND 5 5 GND
DTR 4 6 DSR
DSR 6 4 DTR
RTS 7 8 CTS
CTS 8 7 RTS
D-Sub 9 D-Sub 9
3-Wire Configurations(Not standard)
PC TV
RXD 2 3 TXD
TXD RXD
3 2
GND 5 5 GND
DTR 4 6 DSR
DSR DTR
6 4
RTS 7 8 CTS
CTS 8 7 RTS
D-Sub 9 D-Sub 9
Set ID
Set ID number.
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to
OPTION and press ENTER.
3
Press the Navigation buttons to scroll to Set ID
and press ENTER.
4
Scroll left or right to select a set ID number and
select CLOSE. The adjustment range is 1-99.
5
When you are finished, press EXIT.

REMOTE CONTROL

The descriptions in this manual are based on the buttons of the remote
control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA)
matching and ends to the label inside the compartment, and close
the battery cover. Be sure to point the remote control at the remote control
sensor on the TV.
CAUTION
y
Do not mix old and new batteries, as this may damage the remote control.
Make sure to point the remote control at the remote control sensor on the TV.
POWER
Turns the TV on or off.
ENERGY SAVING (See p.61)
Adjusts the Energy Saving settings.
AV MODE INPUT
ENERGY
TV
AV MODE (See p.41)
SAVING
Selects an AV mode.
1 2 3
INPUT (See p.41)
Rotates through inputs.
4 5 6
Also switches the TV on from standby.
7 8 9
TV
Returns to the last TV channel.
0
FLASHBK
LIST
Alphanumeric buttons
Enters letters and numbers.
AV MODE INPUT
ENERGY
TV
LIST (See p.37)
Accesses the saved channel list.
SAVING
- (Dash)
1 2 3
Inserts a dash between numbers such as 2-1 and 2-2.
4 5 6
FLASHBK
Alternates between the two last channels selected (pressing repeatedly);
7 8 9
Selects a channel on the currently selected channel list.
0
FLASHBK
LIST
31
REMOTE CONTROL