Battery Door - Sharp SPC900 User Instructions

5. BATTERY DOOR

6. WALL-MOUNTING HOLDER:
- Use it to support the transmitter on the wall.
7. TABLE STAND:
- Use it to stand the transmitter on the desktop.
RECEPTION OF TRANSMITTER SIGNAL
OPERATING THE WEATHER STATION
1. Remove the battery door and insert 2 AA size batteries
into the battery compartment as per the polarity
information marked on the battery compartment.
2. Replace the battery door.
3. Press "RESET" key to restart the clock.
4. Press "CHANNEL" key to set the desired channel.
NOTE:
1. The building material and position of receiver and
transmitter affect the effective range. So try various
locations to obtain the best result.
2. Place the units away from metal objects and electrical
appliances to minimize the interference. Position the
receiver within the effective transmission range: 330
feet (100 meters) in usual circumstances.
6
For the transmitter, fix the separate wall-mounting stand
outside in the area protected from direct rain by the screw.
Once the stand is mounted, place the transmitter into the
stand on the wall. Besides, you can also place it on the
desktop by its table stand.
15