Removing A Sim - HP Mini User Manual

To insert a SIM:
1. Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn
the computer on by sliding the power switch. Then shut down the computer through the
operating system.
2. Disconnect all external devices connected to the computer.
3. Unplug the power cord from the AC outlet.
4. Turn the computer upside down on a flat surface, with the battery bay toward you.
5. Remove the battery.
6. Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.
7. Replace the battery.
NOTE:
8. Reconnect external power.
9. Reconnect external devices.
10. Turn on the computer.

Removing a SIM

To remove a SIM:
1. Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn
the computer on by sliding the power switch. Then shut down the computer through the
operating system.
2. Disconnect all external devices connected to the computer.
3. Unplug the power cord from the AC outlet.
4. Turn the computer upside down on a flat surface, with the battery bay toward you.
5. Remove the battery.
new image will be
requested before
final review
If the battery is not replaced, HP Mobile Broadband is disabled.
Using HP Mobile Broadband (select models only) 33