Backlight; Gps Information - Motorola XPLORE 500 User Manual

open for on.
Press to confirm and exit.
3.2.2

Backlight

Press Backlight to change the brightness of the screen. You can make it darker
or brighter by tapping "<" or ">".
You can also set a time out period of 10 seconds to 3 minutes using the auto off
setting.
Press to confirm and exit
3.2.3

GPS Information

This page is for information only. You can view the number of satellite signals the
unit is receiving as well as the strength of these signals.
This page gives the latitude and longitude of your current position, your current
speed and the status of your position, i.e. Fixed 3D or Fixed Invalid etc. The
compass circle shows the satellites that the unit is receiving and the bar chart
shows the signal strength for these satellites. To exit, press
Note
At least four GPS signals are required for the device to function. There may be
occasions when the signal strength is limited within your home or surrounding
area, and GPS navigation is not possible. This is quite normal for products of this
type.
Basic Device Operations and Settings
.
15