Client Does Not Receive an IP Address - Cannot Connect to
Internet
1. If the HP 520wl is configured as a DHCP server, open the Web-browser
Interface and select the
the
DHCP Server
2. If you are using the DHCP feature on the HP 520wl, then ensure your
local DHCP server is operating on the same subnet mask as your
HP 520wl.
N OTE:
For more information regarding DHCP Server settings, see the HP 520wl
User's Guide.
3. From the client computer, use the
connection with the HP 520wl. If the HP 520wl responds, but you still
cannot connect to the Internet, there may be a physical network config-
uration problem.
12
Configure
tab to ensure the proper DHCP settings are being used.
button, then the
network command to test the
ping
tab and then
Network