Honeywell Thor VM2 User Manual page 100

Touch Screen Software
PenMount Universal software is installed for calibrating the touch screen. See
47) for more information.
Software is installed for calibrating the standard resistive touch screen. See
for more information.
Touch screen calibration is not necessary with the optional Projective Capacitance (PCAP) touch screen.
RFTerm
Optional terminal emulation software. The application can also be accessed by double-clicking the RFTerm desk-
top icon.
For Microsoft Windows 7 and Windows Embedded Standard 7:
It is necessary to run to run RFTerm as an administrator when modifying settings because RFTerm must be
able to access and make changes to the Windows registry.
Rather than selecting to run as administrator each time, right-click on the RFTerm icon and select Proper-
ties. Tap the Compatibility tab and check Run this program as an administrator. This modification affects
the current user only unless Change settings for all users is tapped before changing the privilege level.
Summit Client Utility
(Start) > Control Panel > Wi-Fi, or SCU icon on desktop
Manage the wireless 802.11 client installed in the Thor VM2. If the Summit Client Utility is not present, the Laird
Configuration Manager may be installed.
Laird Configuration Manager
LCM icon on desktop
Manage the wireless 802.11 network device installed in the Thor VM2. If the Laird Configuration Manager is no
present, the Summit Client Utility may be installed.
Freefloat Link*One Wedge
Link*One bar code decoder configuration software is installed on the Thor VM2. A pdf User's Manual for Link*One
is included as part of the installation at C:\Program Files\Freefloat\Freefloat Link One. Refer to this manual or the
Freefloat website
Freefloat Access*One TE (Optional)
Access*One terminal emulation software is available on the Thor VM2. A pdf User's Manual for Access*One is
included as part of the installation at C:\Program Files\Freefloat\Freefloat Access One. Refer to this manual or the
Freefloat website
Freefloat Key*One
Key*One input panel (soft keyboard) software is installed on the Thor VM2. A pdf User's Manual for Key*One is
included as part of the installation at C:\Program Files\Freefloat\Freefloat Key One. Refer to this manual or the
Freefloat website
Selecting Keyboard Layout
Several keyboard layouts are included with the Key*One install. To select or change the keyboard layout,
select
outs are listed for SVGA and VGA. Tap the desired keyboard layout to select and launch that keyboard.
Launching Keyboard
To launch the keyboard with the preselected layout, select
cuts menu) or
To close the keyboard, tap the X (close control) usually located in the upper right corner of the keyboard.
5 - 2
for information on configuring and using Link*One.
for information on configuring and using Access*One.
for information on configuring and using Key*One.
(Start) > All Programs > Freefloat Key > Keyboard Layouts. Several predefined keyboard lay-
(Start) > All Programs > Freefloat Key> Runtime Keyboard.
Touch Screen Calibration
Touch Screen Calibration
(Start) > Runtime Keyboard (from the short-
(page 5-
(page 5-47)