Siemens SIMATIC S7-1500 Manual page 12

Product overview
2.1 Properties
Properties
The module has the following technical properties:
● 8 analog inputs
● Voltage measurement type can be set per channel
● Current measurement type can be set per channel
● Measuring type resistance adjustable for channel 0, 2, 4 and 6
● Measuring type resistance thermometers (RTD) adjustable for channel 0, 2, 4 and 6
● Thermocouple (TC) measurement type can be set per channel
● Resolution 16 bits including sign
● Configurable diagnostics (per channel)
● Hardware interrupt on limit violation can be set per channel (two low and two high limits
per channel)
The module supports the following functions:
Table 2- 1 Version dependencies of the module functions
Function
Firmware update
Identification data I&M0 to I&M3
Parameter assignment in RUN
Isochronous mode
Calibration in runtime
Module-internal Shared Input (MSI)
Configurable submodules / submod-
ules for Shared Device
Configurable after interface module
IM 155-5 DP ST
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
12
Firmware version of
the module
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
V2.0.0 or higher V13 Update 3 or higher
(PROFINET IO only)
V2.0.0 or higher V13 Update 3 or higher
(PROFINET IO only)
V2.0.0 or higher
Analog input module AI 8xU/I/RTD/TC ST (6ES7531-7KF00-0AB0)
Configuration software
STEP 7
(TIA Portal) (TIA Portal) V12 or higher, or
STEP 7 V5.5 SP3 or higher
V12 or higher
V12 or higher
V12 or higher
V12 or higher
V12 or higher
V13 or higher
Manual, 09/2016, A5E03484864-AD
GSD file in STEP 7
X
X
X
---
X
X
(PROFINET IO only)
X
(PROFINET IO only)
X