6.8
Test sockets X131 - X134
Application
The test sockets are used to output analog signals. Any interconnectable signal can be
output to any test socket on the control unit.
● Max. output range of the test signal: 0 to 5 V
● Test sockets have to be parameterized before use, as there is no default setting on
Test socket position
Figure 6-10
NCU
Manual, 07/2007, 6FC5397-0AP10-2BA0
delivery.
CAUTION
The test sockets should be used exclusively for servicing purposes.
The measurements may only be carried out by appropriately trained specialists.
Test socket arrangement
Interfaces
6.8 Test sockets X131 - X134
59