Pioneer Super Tuner III D DEH-3150UB Brochure page 54

Speakers
TS-A Series Speakers
TS-A1702C
17 cm Packaged Component Speaker System
• 17 cm woofer/23 mm soft-dome tweeter
• Extended pole yoke design
TS-A1302C
13 cm Packaged Component Speaker System
• 13 cm woofer/23 mm soft-dome tweeter
• Maximum input: 180 W
TS-A6993S
6" × 9" 5-Way Speaker
• 6" × 9" (16 cm × 24 cm) woofer/25 mm soft-dome midrange/20 mm cone tweeter/
11 mm dome supertweeter/9 mm dome supertweeter
• Cone tweeter with neodymium magnet
• Silver PET film dome supertweeter
• Maximum input: 460 W
TS-A6983S
6" × 9" 4-Way Speaker
• 6" × 9" (16 cm × 24 cm) woofer/25 mm soft-dome midrange/
17 mm dome tweeter/11 mm dome supertweeter
• Silver PET film dome tweeter and supertweeter
• Maximum input: 440 W
Common Features
• Carbon graphite IMPP interlaced aramid/basalt fiber
cone woofer
• Glass-imide voice coil former for higher power
handling capabilities
Carbon Graphite IMPP Interlaced Aramid/Basalt Fiber Cone
TS-A6993S TS-A6983S
This IMPP cone is designed with new basalt fibers
interlaced with long aramid fibers to provide strength
and rigidity that powerful bass sound requires. High-
density compressed internal architecture is resilient,
stacks up against high power well and transfers sound
quickly. The result is full-bodied, rich sound character
with midrange depth that conventional IMPP cones
cannot match.
54
230 W Max.
• Maximum input: 230 W
• Nominal input: 50 W
180 W Max.
• Nominal input: 35 W
NEW
460 W Max.
NEW
440 W Max.
• Light weight copper-clad aluminum voice coil design
• Light weight balanced soft-dome midrange design
with wave guide energy focusing design
• Full depth basket for longer excursion and richer bass
• Nominal input: 80 W
TS-A6973E TS-A6963E TS-A1683S
Natural Basalt
TS-A1702C
Common Features
• Carbon graphite IMPP cone woofer using interlaced aramid fiber
• Butyl rubber surround for smoother response
• Glass-imide voice coil bobbin
• Single conex damper
• Light weight soft-dome tweeter with neodymium magnet and magnetic fluid
• Rear chamber for lower crossover frequency (tweeter)
• Surface (angled), flush or invisible tweeter mounting kit
• In-line type high-quality crossover (LPF: –6 dB/oct., HPF: –12 dB/oct.)
TS-A6993S
TS-A1673S
Color pellet
Base polypropylene
Melted
and spun
Carbon graphite
Coated ultra long basalt fiber
Long aramid fiber
Carbon Graphite IMPP
Interlaced Aramid/Basalt
Fiber Cone