Disassembly; Voltage Selection - Sharp RT-W800H Service Manual

Caution on Disassembly
Follow the below-mentioned notes when disassembling the
unit and reassembling it, to keep its safety and excellent
performance:
2. Be sure to remove the power supply plug from the wall
outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need
be removed when disassembling the unit, After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.
4. Take sufficient care on static
circuits and other circuits when servicing.
The voltage selector is located on the bottom side of the unit.
the selector in either direction until the correct voltage figure
is displayed in the window next to the adjustment screw.
Figure 5-l
Figure 5-2
5 - 3
Figure
Figure 5-4