Advertisement
Function Operation
The interface displays all connected indoor units. Tap to choose desired units
to add to group. The selected unit will turn to blue after being tapped (tap
again to deselect).
For example: after tapping indoor units 26-1, 26-2, it will display as shown in
picture 4.
Picture 4
After choosing the indoor units, press OK key at the top-right corner. The new
zone will be displayed on the left.
Tap the group name on the left, the background will be highlighted, the two
indoor units of the 1st floor zone will be shown. See picture5.
Each zone supports up to 64 devices.
Press
to return to the last layer when grouping indoor units.
17
Hide quick links:
Advertisement
