Charging The Battery - Motorola CP185 Series User Manual

Charging the Battery

1. Make sure radio is OFF.
2. Plug the power supply into an electric outlet.
3. Connect the power supply output cord connector into
the rear of the Desktop Changing Tray.,
4. The LED on the charger blinks green once to indicate
charger is turned ON.
10
English
CP185
5. Turn the radio OFF before charging the battery.
Insert a battery, or a radio with a battery into the
charger's pocket by:
a) Aligning the groove on each side of the battery
with the corresponding raised rail on each side of
the charger pocket OR
b) Pressing the battery towards the rear of the
pocket OR
c) Sliding the battery into the charger pocket,
ensuring complete contact between the charger
and battery contacts.
6. The charger's LED color will indicate the battery
charging status. (See "Charging Status" on page 11).
Refer to picture below for the battery insert visual guide line.
Battery insert visual guide line