Pioneer 655A Operating Instructions Manual page 64

08 The Initial Settings Menu
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speaker
You can set the individual channel levels
between –6dB and +6dB using the test tone
output as a guide to set the correct levels.
Adjust the levels until the output level from
all channels sounds the same from your
usual listening position.
Automatic: Select Auto to start the test tone
output.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
As the test tone plays through each speaker
in turn, it is highlighted on-screen. Use the
(cursor up/down) buttons to adjust the
/
channel output level of the current speaker.
Press (cursor left) to exit the test tone
sequence, or ENTER to save the settings and
exit the channel level setting screen.
Manual: Use the
buttons to select a speaker.
64
En
Auto
L 0.0dB
0.0dB
C
0.0dB
R
0.0dB
RS
LS 0.0dB
0.0dB
SW
Auto
0.0dB
L
0.0dB
C
0.0dB
R
RS 0.0dB
LS 0.0dB
0.0dB
SW
/ (cursor up/down)
Initial Settings
Auto
Digital Audio Out
Video Output
0.0dB
L
Language
C 0.0dB
0.0dB
Display R
0.0dB
RS
Options
0.0dB
LS
Speaker
SW 0.0dB
Press (cursor right) then use the
(cursor up/down) buttons to set the channel
output level.
Initial Settings
Auto
Digital Audio Out
Video Output
0.0dB
L
Language
C 0.0dB
R 0.0dB
Display
0.0dB
RS
Options
0.0dB
LS
Speaker
0.0dB
SW
To turn the test tone on/off for an individual
speaker, press (cursor right). The test tone
continues playing even when you select a
different speaker.
Initial Settings
Auto
Digital Audio Out
Video Output
L 0.0dB
Language
0.0dB
C
0.0dB
R
Display
0.0dB
RS
Options
LS 0.0dB
Speaker
0.0dB
SW
Press ENTER to save the settings and exit the
channel level setting screen.
/