Fixing The Sensor - Pioneer SGY-CS500 User Manual

Fixing the Sensor

After installing the Speed & Cadence
sensor, cadence magnet, and speed
magnet, pair the sensor with the
Cyclocomputer SGX-CA500 or other
cyclocomputer, and confirm that
the cadence is displayed with the
rotation of the crank, and the speed
is displayed with the rotation of the
wheel. Refer to the Quick Start Guide
of the Cyclocomputer SGX-CA500 or
your cyclocomputer's owner manual for
sensor pairing.
After confirming that the information
from the Speed & Cadence sensor is
displayed correctly, fix the band with
the fixing tape for the sensor's band.
After fixing the Speed & Cadence
sensor, install the pedal to the crank.
Installation on Your Bike
• Be sure to use the fixing tape. If
you do not use the fixing tape, the
sensor's band may slip off and the
sensor may fall off during a ride.
• Do not re-use the fixing tape. The
used fixing tape may come off during
a ride because its adhesion has
decreased.
• Securely fix the Speed & Cadence
sensor to the chain stay so it does
not fall towards the crank or spokes
while riding.
• Before riding, check that the sensor
and magnets are installed securely.
Also check that the speed detector
arm's screw is not loose, there are
no cracks in the band, and the band's
fixing tape is not coming off.
• For best results, keep the sensors
and magnets free of mud, dust, or
debris.
EN
19