Connecting An Av Receiver Or Amplifier; Connecting Using A Commercially Available Hdmi Cable - Pioneer Elite BDP-05FD Operating Instructions Manual

Caution
• Video signals are only output with a resolution of 480/60i when
connected using a video cable (included) or an S-Video cable
(commercially available).
• Connect the player's video output directly to your TV.
This player supports analog copy protection technology.
Therefore the picture may not be displayed properly if connected
to a TV via a DVD recorder/video deck or when playing the
player's output material that is recorded by a DVD recorder/
video deck. Furthermore, the picture may not be displayed
properly due to the copy protection when the player is connected
to a TV with a built-in video deck. For details, contact the
manufacturer of your TV.
Connecting an AV receiver
or amplifier
Connect to an AV receiver or amplifier in order to enjoy the surround
sound of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD
Master Audio, DTS-HD High Resolution Audio or DTS Digital
Surround. For instructions on connecting the TV and speakers to the
AV receiver or amplifier, refer to the operating instructions of AV
receiver or amplifier.
Note
• Make the settings in the Setup Navigator menu according to the
type of cable connected (page 20).
• To output video signals from this player, connect using one of
the following (not including when connected using an HDMI
cable): a component video cable (commercially available), an S-
Video cable (commercially available) or a video cable (included).
Connecting using a commercially
available HDMI cable
Caution
• When DTS-HD Master Audio and DTS-HD High Resolution
Audio signals are output as linear PCM signals, the DTS Digital
Surround signals are converted to linear PCM for output
(page 50).
Player's rear panel
R L
AUDIO OUT (2 ch)
DIGITAL
OUT
COAXIAL
CONTROL
IN
OPTICAL
Match the direction of
the plug to the terminal
and insert straight.
AV receiver or amplifier
SURROUND
FRONT SURROUND BACK CENTER
L
R
SUB WOOFER VIDEO OUT
AUDIO OUT (7.1 ch)
COMPONENT VIDEO AC IN
Y
P VIDEO
B
HDMI OUT
P R S-VIDEO
P VIDEO
B
HDMI OUT
P S-VIDEO
R
To HDMI input terminal
From HDMI output terminal
To HDMI input terminal
TV
Direction of
signal flow
02
17
En