Resuming Playback From A Specific; Position (Last Memory) - Pioneer PDV-10 Operating Instructions Manual

Resuming playback from a specific position (last memory) - DVDs and video CDs
The last memory function can be used to resume playback from the desired
position.
Remote control unit only
2
4
1 3
e 8
1
Remote control unit only
2
Notes:
• With DVDs, this function may not work
with some discs.
• With DVDs, when you store the last
memory position for a sixth disc, the
oldest position in the memory (the first
one stored) is overwritten.
• With video CDs, the last memory position
can only be stored for one disc, and the
position is cleared from the memory
when the disc is removed.
• With video CDs, the last memory function
may not work when playing the disc with
playback control. If this happens, play the
disc without displaying the menus.
(Page 49).
¢
CLEAR
¡
2
E 7
Advanced Functions
Storing the position from which playback
is to be resumed
1
Press the LAST MEMORY
button during playback.
"Last Memory" appears on the display.
2
Press the power button to turn
off the power or press the
STOP button.
Hint:
Unlike the resume function, with the last memory
function the position remains in the memory even
after the disc is removed. Last memory positions
can be set for up to five DVDs.
Resuming playback from the last memory position
1
Load the disc for which the last
memory position is stored.
With some DVDs, playback starts
automatically when the disc is loaded. In this
case, press the STOP button to stop playback.
2
In the stop mode, press the
LAST MEMORY button.
Clearing the last memory position
Perform the procedure under "Resuming
playback from the last memory position"
above, then in step 2 press the CLEAR button
while "Last Memory" is displayed. "Last
Memory" turns off and the last memory
position is cleared from the memory. 111
En