Glossary - HP 16Gb SAN User Manual

Brocade 16gb san switch for nl hp bladesystem c-class
Table of Contents

Advertisement

Glossary

This glossary defines terms used in this guide or related to this product. It is not a
comprehensive glossary of computer terms.
A
AL_PA
Arbitrated loop physical address. A unique 8-bit value assigned during loop initialization to a
port in an arbitrated loop. See also
alias server
A fabric software facility that supports multicast group management.
API
Application programming interface. A defined protocol that allows applications to interface with
a set of services.
arbitrated loop
A shared 100 Mbps FC transport structured as a loop. Supports up to 126 devices and one
fabric attachment. See also
AW_TOV
Arbitration wait time-out value. The minimum time an arbitrating L_Port waits for a response before
beginning loop initialization.
B
backup FCS switch
Backup fabric configuration server switch. The switch or switches assigned as backup in case
the primary FCS switch fails.
bandwidth
The total transmission capacity of a cable, link, or system. Usually measured in bits per second
(bps). May also refer to the range of transmission frequencies available to a link or system.
broadcast
The transmission of data from a single source to all devices in the fabric, regardless of zoning.
buffer-to-buffer
Management of the frame transmission rate in either a point-to-point topology or an arbitrated
flow control
loop. See also
C
CLI
Command line interface. Interface that depends entirely on the use of commands, such as through
Telnet or SNMP, and does not involve a GUI.
compact flash
Flash (temporary) memory that is used in a manner similar to hard disk storage. It is connected
to a bridging component that connects to the PCI bus of the processor. Not visible within the
processor's memory space.
configuration
The way a system is set up. May refer to hardware or software:
CRC
Cyclic redundancy check. A check for transmission errors that is included in every data frame.
D
data word
A type of transmission word that occurs within frames. The frame header, data field, and CRC
all consist of data words.
defined zone
The set of all zone objects defined in the fabric. May include multiple zone configurations. See
configuration
also zone,
DHCP
Dynamic Host Configuration Protocol
directory service
See SNS.
DLS
Dynamic load sharing. Dynamic distribution of traffic over available paths. Allows for recomputing
of routes when an Fx_Port or E_Port changes status.
34
Glossary
public
arbitrated
loop, point-to-point, topology.
Hardware: The number, type, and arrangement of components that make up a system or
network.
Software: The set of parameters that guide switch operation. May include general system
parameters, IP address information, domain ID, and other information. Modifiable by any
login with administrative privileges. May also refer to a set of zones.
zone
configuration.
non-participating
mode.
device,
public
loop.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents