Using The Initial Setup Menu - Pioneer DVR-540H-S Operating Instructions Manual

14
The Initial Setup menu
Chapter 14
The Initial Setup menu

Using the Initial Setup menu

The Initial Setup menu is where you can set various recorder options for sound, picture,
language and so on.
Some settings can only be changed when the recorder is stopped. During playback and
recording these settings are grayed out in the Initial Setup menu.
Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of
inactivity.
• Press HOME MENU and select 'Initial Setup'.
In the table below, the default option is marked with a •.
Setting
Basic
Clock Setting
The clock must be set in order to use timer recording.
HELP Setting
Setup Navigator
Tuner
Auto Channel
Setting
110
En
Options Explanation
Auto Set the channel that broadcasts a clock signal and
the clock will be set automatically.
Manual • If there is no channel that broadcasts a clock signal
in your area, you can set the time and date manually.
On • Switches on the automatic Help screens for GUI dis-
plays.
Off
Switches off the automatic Help screens for GUI dis-
plays. (Press HELP on the remote to manually display
the Help screen.)
Start
Select to start the Setup Navigator. See also
ing on and setting up
Antenna •
Select if you receive channels from an antenna. It
takes a few moments for the auto tuning to complete.
Cable
Select if you receive channels via cable. It takes a few
moments for the auto tuning to complete.
Switch-
.
on page 30