Mount The Camera - D-Link DCS-2330L Quick Install Manual

Refer to the steps below to assist you with mounting the camera.
We recommended that you configure the camera first, before mounting it.
Place the mounting plate where you want
1
to position the camera and mark the holes
where you will place the screws.
Depending on the material of the wall or
2
ceiling, use the proper tools to drill two
holes where you drew the marks.
Note: If the wall is made out of concrete, drill
the holes first and insert the plastic anchors to
support the screws.
When you place the mounting plate over
3
the holes that you drilled in the wall, make
sure you align the holes. Use the supplied
screws to attach the mounting base to the
surface of the wall.
Place the mounting base cover on the
4
mounting plate. Reattach the camera
mount onto the mounting base by holding
the camera mount and twisting the camera
mount clockwise into the mounting base.
Adjust the direction of the camera as
5
desired, then tighten the collar on the
camera mount to lock it in place.

Mount the Camera

6