Table of Contents
Advertisement
Section 3 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your Internet Service
Provider (ISP) uses a PPTP connection. Your ISP will provide you with a
username and password.
PPTP Server IP
Enter the PPTP server IP address provided by your ISP.
Address:
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Reconnect Mode:
Select either Always on, On demand, or Manual.
Maximum Idle
Enter a maximum idle time during which the Internet connection is
Time:
maintained during inactivity. To disable this feature, select Always
on as the reconnect mode.
Advanced Settings
Select Static IP if your ISP assigned you the IP address, subnet mask,
Address Mode:
gateway, and DNS server addresses. In most cases, select Dynamic IP.
Dynamic IP
Primary DNS
Enter the primary DNS server IP address assigned by your ISP.
Server:
Secondary DNS
Enter the secondary DNS server IP address assigned by your ISP.
Server:
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP. Select Manual to define a custom
MTU value. The recommended setting is Auto.
D-Link COVR-3902 User Manual
PPTP
43
Hide quick links:
Advertisement
Table of Contents
