Connecting Outputs - Pioneer SVM-1000 Operating Instructions Manual

CONNECTIONS

CONNECTING OUTPUTS

MASTER ATT. switch
PHONO DVD/LINE
L
R
POWER
OFF
ON
AC IN
S-VIDEO
Power amplifier
(XLR plug input connectors)
Audio master output
This unit is furnished with balanced output MASTER OUT 1
(supporting XLR plugs), and unbalanced output MASTER OUT 2
(supporting RCA plugs).
Using the MASTER ATT. switch, adjust the output level to match
the input sensitivity of the power amplifier used.
If the operating panel's MONO/STEREO switch is set to [MONO],
the master output will be a monaural combination of L+R
channels.
Booth monitor output
TRS output for ø 6.3 mm phone plug. The sound volume for this
output is controlled by the BOOTH MONITOR level dial,
independently of the master output level setting.
Power amplifier
(RCA plug input
connectors)
R
SIGNAL GND
1 GND 2 HOT
LINE DVD MASTER OUT 1
3 COLD
R L
L
CONTROL CONTROL
-6 dB
R
SYNC SYNC
DIGITAL
OUT OUT
IN
48 k
DVD DVD MASTER
COMPONENT
S-VIDEO
Y C B C R
VIDEO VIDEO
Sampling
frequency
selector switch
Cassette deck
(analog input
recording device)
L L R
MASTER REC
OUT BOOTH LINE DVD
OUT 2
MONITOR
(TRS)
L L
MASTER
R L
ATT.
CONTROL
-3 dB
0 dB
R R
SYNC
DIGITAL OUT DIGITAL
OUT
IN
fs (Hz)
96 k
MONITOR DVD
COMPOSITE
S-VIDEO
S-VIDEO S-VIDEO VIDEO
Plasma display Display
(for monitor)
Recording output
These are output connectors for recording, supporting RCA plugs.
Digital output
This is a coaxial digital output connector, supporting RCA plugs.
The sampling frequency can be set to 96 kHz/24-bit format or
48 kHz/24-bit format to match the connected device.
Turn power off before changing this switch position.
Video master output
Supports component, composite (RCA, BNC connector) and S-
VIDEO outputs.
Monitor output
Supports composite and S-VIDEO outputs.
Digital input AV amplifier
(digital input
recording device)
SIGNAL GND
PHONO DVD/LINE
L
CONTROL
R
SYNC
OUT
OUT
DVD
USB
S-VIDEO
VIDEO
Power amplifier
(for booth monitor)
11
En