Try Out The Mix Recording Function - Yamaha SH-01 Owner's Manual

Using the SH-01

Try Out the Mix Recording Function

The Mix Recording function can be used to overdub a vocal part after recording
the guitar part.
* Before you start recording your guitar make sure its in tune. The SH-01 is equipped with a tuner that is
described on
G Recording a Guitar (Make a New Recording)
1
Connect your electric or electric/acoustic guitar to the SH-01's INST. jack. If you playing an
acoustic guitar, you can either use the built-in microphones or connect a dynamic type mi-
crophone to the INST. jack to record audio. If the built-in microphones will not be used,
switch INTERNAL MIC switch to its "OFF" position. Also, connect a pair of headphones to
the LINE OUT/PHONES jack for monitoring.
2
Using the step
• Play the guitar, and adjust the input level while monitoring through a pair of head-
phones.
At this point, preparation for recording the guitar is complete, but let's try adding some of the
SH-01's on-board effects to the guitar's sound.
3
Press the [EFFECT] button to display the effect settings.
The Effect Category name will appear on the top half of the display and the Effect Type will
appear on the bottom half of the display.
20
page 24.
2
of the same procedures described on
CAT:BASIC
TYP:INTERNAL MIC
(→ page 15)
OFF
page 17 and
Effect Category Name
Effect Type
18