Toshiba SD-43HT Service Manual page 15

3-2-5. AMP PCB
1. Take out the 6 screws (B).
2. Unplug the 3 connectors and then remove the AMP PCB.
3-2-6. FRONT PCB-1, FRONT PCB-2
1. Remove the KNOB VOLUME and take out the 10 screws (D).
2. Unplug the connector and remove the FRONT PCB-1 and FRONT PCB-2.
TOSHIBA
CONNECTOR
FRONT PCB-1
KNOB-VOLUME
B
CONNECTOR
D
D
CONNECTOR
Diassembly and Reassembly
AMP PCB
FRONT PCB-2
3-5